Mike,
I based that on what W8JI states on his webpage, which says 1.8 to 20 MHz.
https://www.w8ji.com/mfj-1025_1026.htm
IIRC, Tom designed that for MFJ. Maybe that was a typo (on either Tom's
site or in MFJ's manual). Or perhaps the performance drops off to some
degree above 20 MHz. I don't know.
73, Mike
W0BTU
On Wed, Mar 18, 2020, 10:24 AM Michael Tope <W4EF@dellroy.com> wrote:
Hi Mike,
I was trying to address the particulars of N2IC's situation which
involved the higher HF bands (although at this point in the sunspot
cycle, perhaps I should have included 20 meters).
Reading the manual I have for the MFJ-1026 says "The MFJ-1026 is
optimized over the range of 1.8 to 30 MHz". Does the MFJ-1025 only go to
20MHz?
73, Mike W4EF........
On 3/17/2020 10:31 AM, Mike Waters wrote:
Mike, is there any reason why you tested it above 20 MHz? That's outside
the 1026's specified frequency range.
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector