Topband
[Top] [All Lists]

Re: Topband: [Bulk] Re: RG-6 questions

To: jim@audiosystemsgroup.com, topband@contesting.com
Subject: Re: Topband: [Bulk] Re: RG-6 questions
From: Grant Saviers <grants2@pacbell.net>
Date: Mon, 16 Mar 2015 09:26:13 -0700
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Since non plenum rated cables no longer meet codes, there is an opportunity to buy the NOS of it cheap on ebay. I've scored a couple of ebay 1000' spools of tinned double braid "rg59" Belden, 20 ga center for around 10 cents a foot. I think it's the precision video cable Jim mentions.

Here is some Belden single braid at 10 cents per foot, free delivery!! It is worth a deep search of ebay "belden rg59" now and then.
http://www.ebay.com/itm/Belden-RG-59-20-awg-bare-copper-DS3-75-Ohm-Gray-1000-Box-/171220628530?pt=LH_DefaultDomain_0&hash=item27dd8b7432

Or RG6 might be cheaper but there are at least a dozen varieties that Belden makes, so keep the catalog handy. With Belden NOS so cheap why take the risk of Chinese junk?

Grant KZ1W

On 3/15/2015 11:43 PM, Jim Brown wrote:
I've seen some data CCS center coax. It matters below about 5 MHz.

What is your application for this coax? There's a Belden product with a double copper braid shield and a solid copper center. Look up 9290. About six years ago, I bought a partial spool of a very comparable product at HSC with Pasternak's name on it. I still have some of it. At the same time, I also scored a nearly full 1,000 ft spool of 8213, which feeds my high dipoles.

These are classed as analog video cables, where copper loss at low frequencies was a big deal. Since the transition to digital video, I suspect they sell a lot less of it. :) There are a lot more -- see pages 6.38 - 6.39 in this link.

http://www.datasheets.pl/coaxial_cables/BELDEN_COAXIAL_CABLES.pdf

73, Jim K9YC

On Sun,3/15/2015 10:39 PM, Richard (Rick) Karlquist wrote:
Most RG-6 has a copper clad steel center conductor.
Does anyone have data on what the loss of this
type of cable is at 1.8 MHz compared to solid
copper center conductor?  Any suggestions
for RG-6 with a solid copper center conductor?
I see Belden 1694A, 7915A, 7916A and 9248 in
the catalog, but don't know if any of this is
available in distribution.  Can anyone suggest
some good distributors to buy quality RG-6?
Thanks.

Rick N6RK
_________________
Topband Reflector Archives - http://www.contesting.com/_topband


_________________
Topband Reflector Archives - http://www.contesting.com/_topband


_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>