[Amps] Henry console value, Donald Fox, 2009/12/31

• [Amps] Henry console value, Fern, 2009/12/31
  • Re: [Amps] Henry console value, Carl, 2009/12/31
• Re: [Amps] Henry console value, Ryan Foster, 2009/12/31
  • Re: [Amps] Henry floor model value, Charles Harpole, 2009/12/31
• Re: [Amps] Henry console value, Carl, 2009/12/31
• [Amps] Henry console value, Donald Fox, 2009/12/31
  • Re: [Amps] Henry console value, Ryan Foster, 2009/12/31

[Amps] Testing tubes for an Alpha 78, Paul Gerhardt, 2009/12/31

• Re: [Amps] Testing tubes for an Alpha 78, Carl, 2009/12/31
  • Re: [Amps] Testing tubes for an Alpha 78, Van K7VS, 2009/12/31

[Amps] B&W 852 tank inductor question, David J Windisch, 2009/12/31

• Re: [Amps] B&W 852 tank inductor question, Carl, 2009/12/31
• Re: [Amps] B&W 852 tank inductor question, David J Windisch, 2009/12/31

[Amps] What is Henry 2K Classic X Worth?, Gene, 2009/12/31

• Re: [Amps] What is Henry 2K Classic X Worth?, Carl, 2009/12/31
• Re: [Amps] What is Henry 2K Classic X Worth?, Michael Tope, 2009/12/31
  • Re: [Amps] What is Henry 2K Classic X Worth?, Roger, 2009/12/31
    • Re: [Amps] What is Henry 2K Classic X Worth?, Gary K9GS, 2009/12/31

[Amps] ALS-1300... IMD ??, Jim Thomson, 2009/12/30

• Re: [Amps] ALS-1300... IMD ??, Joe Subich, W4TV, 2009/12/30

[Amps] Alpha 78 Problem, isaonuma, 2009/12/29

• Re: [Amps] Alpha 78 Problem, k8mlm, 2009/12/29
  • Re: [Amps] Alpha 78 Problem, Jim Barber, 2009/12/29
    • Re: [Amps] Alpha 78 Problem, Carl, 2009/12/29
    • [Amps] Not an RF amp but could pass for one........., Randall, Randy, 2009/12/29
    • Re: [Amps] Not an RF amp but could pass for one........., Evert Bakker \(PA2KW\), 2009/12/29
    • Re: [Amps] Not an RF amp but could pass for one........., Gary Hinson, 2009/12/29
• Re: [Amps] Alpha 78 Problem, Sugiyama, 2009/12/29
• Re: [Amps] Alpha 78 Problem, K8MLM, 2009/12/29
  • Re: [Amps] Alpha 78 Problem, Paul Christensen, 2009/12/30
    • Re: [Amps] Alpha 78 Problem, Carl, 2009/12/30
    • Re: [Amps] Alpha 78 Problem, Paul Christensen, 2009/12/30
• [Amps] Alpha 78 Problem, Isao Numaguchi, 2009/12/30

[Amps] looking for an amp design that can run on 120volts, KEVIN ADAM, 2009/12/26

• Re: [Amps] looking for an amp design that can run on 120volts, Dr. David Kirkby, 2009/12/29
• Re: [Amps] looking for an amp design that can run on 120volts, David C. Hallam, 2009/12/29

[Amps] AL-82 question, David J Windisch, 2009/12/26

• Re: [Amps] AL-82 question, gudguyham, 2009/12/29
  • Re: [Amps] AL-82 question, Carl, 2009/12/29

[Amps] Variac repairs, K1SG, 2009/12/26

• Re: [Amps] Variac repairs, Rick Stealey, 2009/12/26
• Re: [Amps] Variac repairs, K8LEEWMM, 2009/12/26
• Re: [Amps] Variac repairs, texasrf, 2009/12/29
  • Re: [Amps] Variac repairs, Ron Youvan, 2009/12/29

[Amps] Ameritron AL-80A Receive muted - relay? p2, Tomas Hood, 2009/12/23

• Re: [Amps] Ameritron AL-80A Receive muted - relay? p2, Gary Smith, 2009/12/26

[Amps] water cooling tips, John Lyles, 2009/12/23

• Re: [Amps] water cooling tips, Paul Christensen, 2009/12/26
  • Re: [Amps] water cooling tips, Carl, 2009/12/26
• Re: [Amps] water cooling tips, Roger, 2009/12/26

[Amps] Ameritron AL-80A Receive muted - relay?, Tomas Hood, 2009/12/22

• Re: [Amps] Ameritron AL-80A Receive muted - relay?, Bill, W6WRT, 2009/12/23
  • Re: [Amps] Ameritron AL-80A Receive muted - relay?, Glen Zook, 2009/12/26
  • Re: [Amps] Ameritron AL-80A Receive muted - relay?, Bill W5WVO, 2009/12/26
    • Re: [Amps] Ameritron AL-80A Receive muted - relay?, Dave Harmon, 2009/12/26
    • Re: [Amps] Ameritron AL-80A Receive muted - relay?, Bill K2OWR, 2009/12/26
    • Re: [Amps] Ameritron AL-80A Receive muted - relay?, Dave Harmon, 2009/12/29
    • Re: [Amps] Ameritron AL-80A Receive muted - relay?, Roger, 2009/12/30
    • Re: [Amps] Ameritron AL-80A Receive muted - relay?, Bill, W6WRT, 2009/12/26
    • Re: [Amps] Ameritron AL-80A Receive muted - relay?, Gary Smith, 2009/12/29
    • Re: [Amps] Ameritron AL-80A Receive muted - relay?, Carl, 2009/12/26
    • Re: [Amps] Ameritron AL-80A Receive muted - relay?, Roger, 2009/12/29
• Re: [Amps] Ameritron AL-80A Receive muted - relay?, Roger Parsons, 2009/12/29

[Amps] water conductivity and hose length, Herzog, 2009/12/20

• Re: [Amps] water conductivity and hose length, Jim Tonne, 2009/12/22
• [Amps] water conductivity and hose length, Dennis OConnor, 2009/12/22
  • Re: [Amps] water conductivity and hose length, Roger, 2009/12/26

[Amps] Site translator, MIKE DURKIN, 2009/12/19

• Re: [Amps] Site translator, Joe Giacobello, 2009/12/20

[Amps] Dentron Needs Plate Choke, Wayne King, 2009/12/19

• Re: [Amps] Dentron Needs Plate Choke, Carl, 2009/12/20
• Re: [Amps] Dentron Needs Plate Choke, Jim W7RY, 2009/12/20

Re: [Amps] GS-35B efficiency, Jim Garland, 2009/12/18

• Re: [Amps] GS-35B efficiency, Bill, W6WRT, 2009/12/18
• Re: [Amps] GS-35B efficiency, Steve Thompson, 2009/12/19
  • Re: [Amps] GS-35B efficiency, Ryan Foster, 2009/12/20
  • Re: [Amps] GS-35B efficiency, Bill, W6WRT, 2009/12/20
• Re: [Amps] GS-35B efficiency, Steve, 2009/12/22

[Amps] Re GS-35B hours.., Robert Briggs, 2009/12/18

• Re: [Amps] Re GS-35B hours.., Doug Renwick, 2009/12/18
• Re: [Amps] Re GS-35B hours.., Jack Parker, 2009/12/19
  • Re: [Amps] Re GS-35B hours.., David H Craig, 2009/12/20
    • Re: [Amps] Re GS-35B hours.., pc5m, Carel, 2009/12/22
  • Re: [Amps] Re GS-35B hours.., Ron Youvan, 2009/12/20
    • Re: [Amps] Re GS-35B hours.., Carl, 2009/12/22
  • Re: [Amps] Re GS-35B hours.., Bill, W6WRT, 2009/12/20
    • Re: [Amps] Re GS-35B hours.., Jack Parker, 2009/12/22
    • Re: [Amps] Re GS-35B hours.., Jeff Blaine AC0C, 2009/12/22

[Amps] Response the "QSK switching time", kingwood, 2009/12/18

• Re: [Amps] Response the "QSK switching time", Paul Christensen, 2009/12/18
  • Re: [Amps] Response the "QSK switching time", Joe Subich, W4TV, 2009/12/18
    • Re: [Amps] Response the "QSK switching time", Alex Eban, 2009/12/19
    • Re: [Amps] Response the "QSK switching time", Paul Christensen, 2009/12/19

[Amps] QSK switching time, k5jv, 2009/12/18

• Re: [Amps] QSK switching time, Paul Christensen, 2009/12/18
  • Re: [Amps] QSK switching time, Joe Subich, W4TV, 2009/12/18
• Re: [Amps] QSK switching time, Carl, 2009/12/18
• Re: [Amps] QSK switching time, Bill, W6WRT, 2009/12/18

[Amps] Fw: Does Ameritron have the industrys worse customer service?, david sutton, 2009/12/18

• Re: [Amps] Fw: Does Ameritron have the industrys worse customer service?, Michael Baker, 2009/12/18

[Amps] Does Ameritron have the industrys worse customer service?, Carl, 2009/12/18

• Re: [Amps] Does Ameritron have the industrys worse customer service?, RICHARD SOLOMON, 2009/12/18
  • Re: [Amps] Does Ameritron have the industrys worse customer service?, Gary Smith, 2009/12/18
• Re: [Amps] Does Ameritron have the industrys worse customer service?, Roger Parsons, 2009/12/18
  • Re: [Amps] Does Ameritron have the industrys worse customer service?, Carl, 2009/12/18
    • Re: [Amps] Does Ameritron have the industrys worse customer service?, David Jordan, 2009/12/18
    • Re: [Amps] Does Ameritron have the industrys worse customer service?, Carl, 2009/12/18
    • Re: [Amps] Does Ameritron have the industrys worse customer service?, David Jordan, 2009/12/18
    • Re: [Amps] Does Ameritron have the industrys worse customer service?, Carl, 2009/12/18
    • Re: [Amps] Does Ameritron have the industrys worse customer service?, Michael Baker, 2009/12/18
    • Re: [Amps] Does Ameritron have the industrys worse customer service?, donroden, 2009/12/18
    • Re: [Amps] Does Ameritron have the industrys worse customer service?, Roger, 2009/12/18
    • Re: [Amps] Does Ameritron have the industrys worse customer service?, Bill K2OWR, 2009/12/18
    • Re: [Amps] Does Ameritron have the industrys worse customer service?, bill price, 2009/12/18
    • Re: [Amps] Does Ameritron have the industrys worse customer service?, Bill, W6WRT, 2009/12/18
    • Re: [Amps] Does Ameritron have the industrys worse customer service?, Jim W7RY, 2009/12/18
• [Amps] Does Ameritron have the industrys worse customer service?, Thomas F. Giella NZ4O, 2009/12/18

Re: [Amps] 3-500Z heater voltage reduction, R Johnson, 2009/12/17

• Re: [Amps] 3-500Z heater voltage reduction, MIKE DURKIN, 2009/12/18
  • [Amps] re problem with VL-1000, Fern, 2009/12/18

[Amps] Question about GS-35b efficiency, Bill, W6WRT, 2009/12/17

• Re: [Amps] Question about GS-35b efficiency, David H Craig, 2009/12/17
  • Re: [Amps] Question about GS-35b efficiency, Bill, W6WRT, 2009/12/18
• Re: [Amps] Question about GS-35b efficiency, Jim Barber, 2009/12/17
  • Re: [Amps] Question about GS-35b efficiency, DAVE WHITE, 2009/12/17
    • Re: [Amps] Question about GS-35b efficiency, MIKE DURKIN, 2009/12/18
    • Re: [Amps] Question about GS-35b efficiency, Ryan Foster, 2009/12/18
    • Re: [Amps] Question about GS-35b efficiency, Gary Schafer, 2009/12/18
• Message not available
  • Message not available
    • Re: [Amps] Question about GS-35b efficiency, Ryan Foster, 2009/12/18
• Re: [Amps] [rfamplifiers] Question about GS-35b efficiency, kd4e, 2009/12/19
  • Re: [Amps] [rfamplifiers] Question about GS-35b efficiency, Jim W7RY, 2009/12/20
• Re: [Amps] Question about GS-35b efficiency, Paul Decker, 2009/12/18
  • Re: [Amps] Question about GS-35b efficiency, RICHARD SOLOMON, 2009/12/18
  • Re: [Amps] Question about GS-35b efficiency, W5CPT, 2009/12/18
    • Re: [Amps] Question about GS-35b efficiency, Jim Barber, 2009/12/18
    • Re: [Amps] Question about GS-35b efficiency, Jeff Blaine AC0C, 2009/12/18
    • Re: [Amps] Question about GS-35b efficiency, Bill, W6WRT, 2009/12/18
    • Re: [Amps] Question about GS-35b efficiency, Jeff Blaine AC0C, 2009/12/18
    • Re: [Amps] Question about GS-35b efficiency, Bill, W6WRT, 2009/12/18
    • Re: [Amps] Question about GS-35b efficiency, Bill, W6WRT, 2009/12/18
    • Re: [Amps] Question about GS-35b efficiency, RICHARD SOLOMON, 2009/12/18

[Amps] water cooling, John Lyles, 2009/12/17

• Re: [Amps] water cooling, mikea, 2009/12/18
• Re: [Amps] water cooling, Carl, 2009/12/18
  • Re: [Amps] water cooling, Randall, Randy, 2009/12/18
    • Re: [Amps] water cooling, Randall, Randy, 2009/12/18
    • Re: [Amps] water cooling, Carl, 2009/12/18
    • Re: [Amps] water cooling, Roger, 2009/12/18
    • Re: [Amps] water cooling, Ron Youvan, 2009/12/18
    • Re: [Amps] water cooling, donroden, 2009/12/18
    • Re: [Amps] water cooling, Ron Youvan, 2009/12/19
    • Re: [Amps] water cooling, Roger, 2009/12/20
    • Re: [Amps] water cooling, Dr. David Kirkby, 2009/12/20
    • Re: [Amps] water cooling, Carl, 2009/12/22
    • Re: [Amps] water cooling, Ron Youvan, 2009/12/23
    • Re: [Amps] water cooling, Dr. David Kirkby, 2009/12/26
• [Amps] Water cooling, Carl, 2009/12/18

[Amps] WTB: SB-220 or AL-811H, Daniel Hileman, 2009/12/17

• [Amps] WTB: SB-220 or AL-811H, MIKE DURKIN, 2009/12/17
  • Re: [Amps] WTB: SB-220 or AL-811H, Steve Katz, 2009/12/17
    • Re: [Amps] WTB: SB-220 or AL-811H, Mike, 2009/12/17
    • Re: [Amps] WTB: SB-220 or AL-811H, Steve Katz, 2009/12/17
    • Re: [Amps] WTB: SB-220 or AL-811H, Mike, 2009/12/17
    • Re: [Amps] WTB: SB-220 or AL-811H, Carl, 2009/12/18
    • Re: [Amps] WTB: SB-220 or AL-811H, Jeff Blaine AC0C, 2009/12/17
  • Re: [Amps] WTB: SB-220 or AL-811H, Roger, 2009/12/17
  • Re: [Amps] WTB: SB-220 or AL-811H, Carl, 2009/12/18

[Amps] Alternative cooling strategies for SB-220?, Bill W5WVO, 2009/12/15

• Re: [Amps] Alternative cooling strategies for SB-220?, Steve Katz, 2009/12/15
• Re: [Amps] Alternative cooling strategies for SB-220?, Joe Subich, W4TV, 2009/12/15
• Re: [Amps] Alternative cooling strategies for SB-220?, k7fm, 2009/12/15
  • Re: [Amps] Alternative cooling strategies for SB-220?, Bill K2OWR, 2009/12/15
    • Re: [Amps] Alternative cooling strategies for SB-220?, Bill W5WVO, 2009/12/15
    • Re: [Amps] Alternative cooling strategies for SB-220?, donroden, 2009/12/15
    • Re: [Amps] Alternative cooling strategies for SB-220?, Gary Smith, 2009/12/16
    • Re: [Amps] Alternative cooling strategies for SB-220?, John Kemker, 2009/12/16
    • Re: [Amps] Alternative cooling strategies for SB-220?, mikea, 2009/12/16
• Re: [Amps] Alternative cooling strategies for SB-220?, Carl, 2009/12/15
• Re: [Amps] Alternative cooling strategies for SB-220?, David H Craig, 2009/12/15
  • Re: [Amps] Alternative cooling strategies for SB-220?, Carl, 2009/12/15
• Re: [Amps] Alternative cooling strategies for SB-220?, Bill, W6WRT, 2009/12/15
• Re: [Amps] Alternative cooling strategies for SB-220?, Alex Eban, 2009/12/15
• Re: [Amps] Alternative cooling strategies for SB-220?, Alek Petkovic, 2009/12/16
• [Amps] Inexpensive Amps?, Roger, 2009/12/26
• Re: [Amps] Alternative cooling strategies for SB-220?, Dave White, 2009/12/16
  • Re: [Amps] Alternative cooling strategies for SB-220?, Roger, 2009/12/16
    • Re: [Amps] Alternative cooling strategies for SB-220?, Carl, 2009/12/17
    • Re: [Amps] Alternative cooling strategies for SB-220?, Roger, 2009/12/17
    • Re: [Amps] Alternative cooling strategies for SB-220?, John D'Ausilio, 2009/12/17
• Re: [Amps] Alternative cooling strategies for SB-220?, SECOPSYS, 2009/12/16
• Re: [Amps] Alternative cooling strategies for SB-220?, donroden, 2009/12/16
• Re: [Amps] Alternative cooling strategies for SB-220?, Colin Lamb, 2009/12/17
  • Re: [Amps] Alternative cooling strategies for SB-220?, Hardy Landskov, 2009/12/17
    • Re: [Amps] Alternative cooling strategies for SB-220?, Carl, 2009/12/17
    • Re: [Amps] Alternative cooling strategies for SB-220?, Mike using AT&T, 2009/12/19
    • Re: [Amps] Alternative cooling strategies for SB-220?, gdaught6, 2009/12/20
• Re: [Amps] Alternative cooling strategies for SB-220?, Rob Atkinson, 2009/12/17
  • Re: [Amps] Alternative cooling strategies for SB-220?, Carl, 2009/12/17
    • Re: [Amps] Alternative cooling strategies for SB-220?, mikea, 2009/12/17
    • Re: [Amps] Alternative cooling strategies for SB-220?, Bill K2OWR, 2009/12/17
    • Re: [Amps] Alternative cooling strategies for SB-220?, Bill W5WVO, 2009/12/17
    • Re: [Amps] Alternative cooling strategies for SB-220?, Roger, 2009/12/17
    • Re: [Amps] Alternative cooling strategies for SB-220?, Roger, 2009/12/17
• Re: [Amps] Alternative cooling strategies for SB-220?, Dave White, 2009/12/17
• Re: [Amps] Alternative cooling strategies for SB-220?, Carl, 2009/12/17
• Re: [Amps] Alternative cooling strategies for SB-220?, Dave White, 2009/12/17
• Re: [Amps] Alternative cooling strategies for SB-220?, Dave White, 2009/12/17
  • Re: [Amps] Alternative cooling strategies for SB-220?, Ron Youvan, 2009/12/17
    • Re: [Amps] Alternative cooling strategies for SB-220?, RK, 2009/12/17
    • Re: [Amps] Alternative cooling strategies for SB-220?, Carl, 2009/12/17
• Re: [Amps] Alternative cooling strategies for SB-220?, Rob Atkinson, 2009/12/18
  • Re: [Amps] Alternative cooling strategies for SB-220?, Bill W5WVO, 2009/12/18
    • Re: [Amps] Alternative cooling strategies for SB-220?, Vic K2VCO, 2009/12/18
    • Re: [Amps] Alternative cooling strategies for SB-220?, Ryan Foster, 2009/12/19
• Re: [Amps] Alternative cooling strategies for SB-220?, Dave White, 2009/12/19
• Re: [Amps] Alternative cooling strategies for SB-220?, texasrf, 2009/12/19

Re: [Amps] "Stacking" power supplies?? how?, texasrf, 2009/12/15

• Re: [Amps] "Stacking" power supplies?? how?, W2XJ, 2009/12/15
  • Re: [Amps] "Stacking" power supplies?? how?, David Cutter, 2009/12/15

[Amps] Russian Power Tubes, MIKE DURKIN, 2009/12/15

• Re: [Amps] Russian Power Tubes, RICHARD GEORGE, 2009/12/15
  • Re: [Amps] Russian Power Tubes, Bill, W6WRT, 2009/12/15
    • Re: [Amps] Russian Power Tubes, RICHARD GEORGE, 2009/12/15
    • Re: [Amps] Russian Power Tubes, David H Craig, 2009/12/15
    • Re: [Amps] Russian Power Tubes, Bill, W6WRT, 2009/12/15
    • Re: [Amps] Russian Power Tubes, RICHARD GEORGE, 2009/12/15
    • Re: [Amps] Russian Power Tubes, Carl, 2009/12/15
    • Re: [Amps] Russian Power Tubes, David H Craig, 2009/12/15
    • Re: [Amps] Russian Power Tubes, Bill, W6WRT, 2009/12/15
    • Re: [Amps] Russian Power Tubes, Gary K9GS, 2009/12/15
    • Re: [Amps] Russian Power Tubes, Bill, W6WRT, 2009/12/15
    • Re: [Amps] Russian Power Tubes, Ron Youvan, 2009/12/16
    • Re: [Amps] Russian Power Tubes, jeff millar, 2009/12/16
    • Re: [Amps] Russian Power Tubes, k7fm, 2009/12/16
    • Re: [Amps] Russian Power Tubes, David H Craig, 2009/12/16
    • Re: [Amps] Russian Power Tubes, Thomas Hoeppe, 2009/12/16
    • Re: [Amps] Russian Power Tubes, DAVE WHITE, 2009/12/16
    • [Amps] Russian Power Tubes, MIKE DURKIN, 2009/12/16
    • Re: [Amps] Russian Power Tubes, Gary Schafer, 2009/12/15
• Re: [Amps] Russian Power Tubes, texasrf, 2009/12/15
• Re: [Amps] Russian Power Tubes, Bill, W6WRT, 2009/12/15
• Re: [Amps] Russian Power Tubes, Dave White, 2009/12/16
• Re: [Amps] Russian Power Tubes, texasrf, 2009/12/16
  • Re: [Amps] Russian Power Tubes, Roger, 2009/12/16
    • Re: [Amps] Russian Power Tubes, Bill, W6WRT, 2009/12/16

[Amps] GU-47B, Nuno Lopes, 2009/12/15

• [Amps] off topic : China amateur satellite, Hsu, 2009/12/15

[Amps] Clipperton L issues, Ken Bessler, 2009/12/14

• Re: [Amps] Clipperton L issues, Alek Petkovic, 2009/12/14
  • Re: [Amps] Clipperton L issues, Ryan Foster, 2009/12/14

[Amps] Gonset GSB201, Bill K2OWR, 2009/12/14

• Re: [Amps] Gonset GSB201, Carl, 2009/12/14
• Re: [Amps] Gonset GSB201, Steve Katz, 2009/12/14

[Amps] Isolation Transformer, David C. Hallam, 2009/12/13

• Re: [Amps] Isolation Transformer, Jim Carr, 2009/12/13
  • Re: [Amps] Isolation Transformer, Glen Zook, 2009/12/14
    • Re: [Amps] Isolation Transformer, maflynn, 2009/12/14
    • Re: [Amps] Isolation Transformer, Jim Carr, 2009/12/14
    • Re: [Amps] Isolation Transformer, Gary Schafer, 2009/12/14
  • Re: [Amps] Isolation Transformer, Bill, W6WRT, 2009/12/14
• Re: [Amps] Isolation Transformer, Dr. David Kirkby, 2009/12/13
  • Re: [Amps] Isolation Transformer, Carl, 2009/12/14
    • [Amps] "Stacking" power supplies?? how?, chas, 2009/12/14
    • Re: [Amps] "Stacking" power supplies?? how?, Vic K2VCO, 2009/12/14
    • Re: [Amps] "Stacking" power supplies?? how?, Paul Christensen, 2009/12/14
    • Re: [Amps] "Stacking" power supplies?? how?, donroden, 2009/12/14
    • Re: [Amps] "Stacking" power supplies?? how?, Bill, W6WRT, 2009/12/15
• Re: [Amps] Isolation Transformer, Gudguyham, 2009/12/13
  • Re: [Amps] Isolation Transformer, Jim Carr, 2009/12/13
    • Re: [Amps] Isolation Transformer, Glen Zook, 2009/12/15

[Amps] Excessive Plate Voltage Henry 2KD-5, Roland AH6RR, 2009/12/12

• Re: [Amps] Excessive Plate Voltage Henry 2KD-5, Bill, W6WRT, 2009/12/12
  • Re: [Amps] Excessive Plate Voltage Henry 2KD-5, Jim W7RY, 2009/12/12
• Re: [Amps] Excessive Plate Voltage Henry 2KD-5, Roland AH6RR, 2009/12/12
  • Re: [Amps] Excessive Plate Voltage Henry 2KD-5, Ron Youvan, 2009/12/12

[Amps] Henry 3K-A, K6QD, 2009/12/11

• Re: [Amps] Henry 3K-A, Dave Harmon, 2009/12/11
  • [Amps] my HS upgrade !, Charles Harpole, 2009/12/11

[Amps] 3-500z Plate voltage..., Dennis OConnor, 2009/12/11

• Re: [Amps] 3-500z Plate voltage..., Bill W5WVO, 2009/12/11

[Amps] 3-500z Plate voltage..., MIKE DURKIN, 2009/12/10

• Re: [Amps] 3-500z Plate voltage..., Bill, W6WRT, 2009/12/11

[Amps] Hot stick, Donald Fox, 2009/12/10

• Re: [Amps] Hot stick, Gary Smith, 2009/12/10
• Re: [Amps] Hot stick, Jim Carr, 2009/12/10
• Re: [Amps] Hot stick, Ian White GM3SEK, 2009/12/10
  • Re: [Amps] Hot stick, Jim W7RY, 2009/12/11

[Amps] Tube life, Donald Fox, 2009/12/10

• Re: [Amps] Tube life, Carl, 2009/12/10
• Re: [Amps] Tube life, Carl, 2009/12/10

[Amps] Alpha 76 problem, k9sd, 2009/12/10

• Re: [Amps] Alpha 76 problem, Carl, 2009/12/10
  • Re: [Amps] Alpha 76 problem, Val Erwin, 2009/12/10
    • Re: [Amps] Alpha 76 problem, Carl, 2009/12/10

[Amps] Life of 3CX800 tubes, Rick Stealey, 2009/12/10

• Re: [Amps] Life of 3CX800 tubes, Bill, W6WRT, 2009/12/10
  • Re: [Amps] Life of 3CX800 tubes, Carl, 2009/12/10
• Re: [Amps] Life of 3CX800 tubes, Dick Green WC1M, 2009/12/10

[Amps] Chinese DIN connectors, K1SG, 2009/12/09

• Re: [Amps] Chinese DIN connectors, Jeff Blaine AC0C, 2009/12/10
• Re: [Amps] Chinese DIN connectors, Ryan Foster, 2009/12/10
  • Re: [Amps] Chinese DIN connectors, Roger, 2009/12/10
    • Re: [Amps] Chinese DIN connectors, mikea, 2009/12/10
    • Re: [Amps] Chinese DIN connectors, RK, 2009/12/10
  • Re: [Amps] Chinese DIN connectors, Mike, 2009/12/10
    • Re: [Amps] Chinese DIN connectors, Vic K2VCO, 2009/12/10
    • Re: [Amps] Chinese DIN connectors, Jeff Blaine AC0C, 2009/12/10
  • Re: [Amps] Chinese DIN connectors, DF3KV, 2009/12/10
    • Re: [Amps] Chinese DIN connectors, Ron Youvan, 2009/12/10
    • Re: [Amps] Chinese DIN connectors, DF3KV, 2009/12/10
    • Re: [Amps] Chinese DIN connectors, Roger, 2009/12/10
    • Re: [Amps] Chinese DIN connectors, Ron Youvan, 2009/12/11
    • Re: [Amps] Chinese DIN connectors, Roger, 2009/12/11
    • Re: [Amps] Chinese DIN connectors, Roger, 2009/12/10
    • Re: [Amps] Chinese DIN connectors, Jeff Blaine AC0C, 2009/12/11

[Amps] N8GPQ GLA 1000 mod pages?, Ulf Tjerneld, 2009/12/09

• Re: [Amps] N8GPQ GLA 1000 mod pages?, Alek Petkovic, 2009/12/09

[Amps] OM power power supply design, Felipe Ceglia, 2009/12/09

• Re: [Amps] OM power power supply design, Ron Youvan, 2009/12/09
  • Re: [Amps] OM power power supply design, Hsu, 2009/12/09
• Re: [Amps] OM power power supply design, Bill, W6WRT, 2009/12/09
  • Re: [Amps] OM power power supply design, Alek Petkovic, 2009/12/09
    • Re: [Amps] OM power power supply design, Larry Benko, 2009/12/09
    • Re: [Amps] OM power power supply design, Alek Petkovic, 2009/12/09
    • Re: [Amps] OM power power supply design, RICHARD SOLOMON, 2009/12/09
    • Re: [Amps] OM power power supply design, Bill, W6WRT, 2009/12/09
    • [Amps] Fw: OM power power supply design, david sutton, 2009/12/09
    • Re: [Amps] OM power power supply design, Alex Eban, 2009/12/09
  • Re: [Amps] OM power power supply design, Alex Eban, 2009/12/09
    • Re: [Amps] OM power power supply design, Bill, W6WRT, 2009/12/10
• Re: [Amps] OM power power supply design, Alex Eban, 2009/12/09
  • Re: [Amps] OM power power supply design, Ron Youvan, 2009/12/10
• Re: [Amps] OM power power supply design, Felipe Ceglia - PY1NB, 2009/12/11

[Amps] Taylor Tubes, w3kl, 2009/12/08

• Re: [Amps] Taylor Tubes, Roger, 2009/12/08

[Amps] transformer duty cycle, Felipe Ceglia, 2009/12/08

• Re: [Amps] transformer duty cycle, Carl, 2009/12/08
• Re: [Amps] transformer duty cycle, Manfred Mornhinweg, 2009/12/10

[Amps] Electricity costs, Steve, 2009/12/08

• Re: [Amps] Electricity costs, Dr. David Kirkby, 2009/12/08
• [Amps] Fw: Electricity costs, david sutton, 2009/12/08

[Amps] Svetlana 4CX800, w3paw3pa.net, 2009/12/07

• Re: [Amps] Svetlana 4CX800, James, 2009/12/08
  • Re: [Amps] Svetlana 4CX800, Kees - pa7two, 2009/12/08
    • Re: [Amps] Svetlana 4CX800, Thomas Carlsson, 2009/12/08
  • Re: [Amps] Svetlana 4CX800, Dick Green WC1M, 2009/12/08
  • Re: [Amps] Svetlana 4CX800, Jeff Blaine AC0C, 2009/12/08
  • Re: [Amps] Svetlana 4CX800, Alek Petkovic, 2009/12/08

[Amps] Ameritron ALS-1300, Phil & Debbie Salas, 2009/12/07

• Re: [Amps] Ameritron ALS-1300, Gary Smith, 2009/12/07
  • Re: [Amps] Ameritron ALS-1300, Joe Subich, W4TV, 2009/12/07

[Amps] Ameritron ALS-1300, Ron Spencer, 2009/12/07

• Re: [Amps] Ameritron ALS-1300, Dino Darling, 2009/12/07
  • Re: [Amps] Ameritron ALS-1300, Phil & Debbie Salas, 2009/12/07
  • Re: [Amps] Ameritron ALS-1300, Joe Subich, W4TV, 2009/12/07

[Amps] FW: Decent HF directional coupler for RF power meas., Phil & Debbie Salas, 2009/12/07

• Re: [Amps] FW: Decent HF directional coupler for RF power meas., Gary Schafer, 2009/12/07
• [Amps] FW: Decent HF directional coupler for RF power meas., Phil & Debbie Salas, 2009/12/07
  • Re: [Amps] FW: Decent HF directional coupler for RF power meas., Gary Schafer, 2009/12/07
• [Amps] FW: Decent HF directional coupler for RF power meas., Phil & Debbie Salas, 2009/12/07
  • Re: [Amps] FW: Decent HF directional coupler for RF power meas., Larry Benko, 2009/12/07
    • Re: [Amps] FW: Decent HF directional coupler for RF power meas., Phil & Debbie Salas, 2009/12/07
• [Amps] FW: Decent HF directional coupler for RF power meas., Phil & Debbie Salas, 2009/12/08
  • Re: [Amps] FW: Decent HF directional coupler for RF power meas., Paul Christensen, 2009/12/08

[Amps] Conservation of Energy!, Dennis OConnor, 2009/12/07

• Re: [Amps] Conservation of Energy!, donroden, 2009/12/07
• Re: [Amps] Conservation of Energy!, Bill, W6WRT, 2009/12/07

[Amps] TITAN II tuning and loading padder capacitors, David J Windisch, 2009/12/06

• Re: [Amps] TITAN II tuning and loading padder capacitors, Fern, 2009/12/06
• Re: [Amps] TITAN II tuning and loading padder capacitors, Bill, W6WRT, 2009/12/06
  • Re: [Amps] TITAN II tuning and loading padder capacitors, Carl, 2009/12/07
    • Re: [Amps] TITAN II tuning and loading padder capacitors, Jim W7RY, 2009/12/07
    • Re: [Amps] TITAN II tuning and loading padder capacitors, Radio WC6W, 2009/12/08
  • Re: [Amps] TITAN II tuning and loading padder capacitors, Gary Schafer, 2009/12/07
• Re: [Amps] TITAN II tuning and loading padder capacitors, David J Windisch, 2009/12/07
  • Re: [Amps] TITAN II tuning and loading padder capacitors, Bill, W6WRT, 2009/12/07

Re: [Amps] Conservation of Energy!, Colin Lamb, 2009/12/06

• Re: [Amps] Conservation of Energy!, George, 2009/12/06
  • Re: [Amps] Conservation of Energy!, Bill W5WVO, 2009/12/06
    • Re: [Amps] Conservation of Energy!, WA3GIN, 2009/12/06
    • Re: [Amps] Conservation of Energy!, Carl Clawson, 2009/12/06
    • Re: [Amps] Conservation of Energy!, Roger, 2009/12/06
  • Re: [Amps] Conservation of Energy!, Jeff Carter, 2009/12/06
• Re: [Amps] Conservation of Energy!, Carl, 2009/12/06
  • Re: [Amps] Conservation of Energy!, K1TTT, 2009/12/06
    • Re: [Amps] Conservation of Energy!, Bill, W6WRT, 2009/12/06
  • Re: [Amps] Conservation of Energy!, Roger, 2009/12/06
• Re: [Amps] Conservation of Energy!, Mike, 2009/12/06
• Re: [Amps] Conservation of Energy!, Gary Smith, 2009/12/06
  • Re: [Amps] Conservation of Energy!, Jim Forsyth, 2009/12/06
• Re: [Amps] Conservation of Energy!, Manfred Mornhinweg, 2009/12/06
• Re: [Amps] Conservation of Energy!, Steve Thompson, 2009/12/07
  • Re: [Amps] Conservation of Energy!, Bill, W6WRT, 2009/12/07

[Amps] Step-start and 3-500Z filament life, Bill W5WVO, 2009/12/05

• Re: [Amps] Step-start and 3-500Z filament life, Ron Youvan, 2009/12/05
  • Re: [Amps] Step-start and 3-500Z filament life, vk3pa, 2009/12/05
    • Re: [Amps] Step-start and 3-500Z filament life, Jim W7RY, 2009/12/05
• Re: [Amps] Step-start and 3-500Z filament life, Gary Schafer, 2009/12/05
• Re: [Amps] Step-start and 3-500Z filament life, Carl, 2009/12/06

[Amps] Coil Winding, AD5VJ Bob, 2009/12/05

• Re: [Amps] Coil Winding, Jeff Carter, 2009/12/05

[Amps] Help With Command Technologies HF2500, w3kl, 2009/12/05

• Re: [Amps] Help With Command Technologies HF2500, K1TTT, 2009/12/05
• Re: [Amps] Help With Command Technologies HF2500, Ron Youvan, 2009/12/05

[Amps] Advice, Dennis OConnor, 2009/12/05

• Re: [Amps] Advice, Ron Youvan, 2009/12/05
  • Re: [Amps] Advice, donroden, 2009/12/06

[Amps] GI-7B, MIKE DURKIN, 2009/12/04

• Re: [Amps] GI-7B, Jeff Blaine AC0C, 2009/12/05
  • Re: [Amps] GI-7B, Ron Youvan, 2009/12/05
    • Re: [Amps] GI-7B, Gary Schafer, 2009/12/05
    • Re: [Amps] GI-7B, MIKE DURKIN, 2009/12/06
    • Re: [Amps] GI-7B, Jeff Blaine AC0C, 2009/12/06

[Amps] GS-31B, David H Craig, 2009/12/04

• Re: [Amps] GS-31B, RICHARD GEORGE, 2009/12/04
• Re: [Amps] GS-31B, Thomas Hoeppe, 2009/12/04

[Amps] (no subject), Bill English, 2009/12/03

• Re: [Amps] (no subject), Roger, 2009/12/03
• Re: [Amps] (no subject), Dave White, 2009/12/04
• Re: [Amps] (no subject), Roger, 2009/12/04
• Re: [Amps] (no subject), Dave White, 2009/12/04

[Amps] FW: Decent HF directional coupler for RF power meas., Gary Schafer, 2009/12/03

• Re: [Amps] FW: Decent HF directional coupler for RF power meas., Ron Youvan, 2009/12/07
• Re: [Amps] FW: Decent HF directional coupler for RF power meas., Phil & Debbie Salas, 2009/12/07
  • Re: [Amps] FW: Decent HF directional coupler for RF power meas., Paul Christensen, 2009/12/07
  • Re: [Amps] FW: Decent HF directional coupler for RF power meas., Gary Schafer, 2009/12/08
    • Re: [Amps] FW: Decent HF directional coupler for RF power meas., Phil LaMarche, 2009/12/08
• Re: [Amps] FW: Decent HF directional coupler for RF power meas., Phil & Debbie Salas, 2009/12/08

[Amps] Svetlana, Edwin Karl, 2009/12/03

• Re: [Amps] Svetlana, Mike McCarthy, W1NR, 2009/12/03
  • Re: [Amps] Svetlana, Dave Harmon, 2009/12/03
    • Re: [Amps] Svetlana, Bill, W6WRT, 2009/12/03
    • Re: [Amps] Svetlana, Carl, 2009/12/03
    • Re: [Amps] Svetlana, Dave Harmon, 2009/12/03

[Amps] Dummy Loads & Wattmeters, Dennis OConnor, 2009/12/03

• Re: [Amps] Dummy Loads & Wattmeters, David C. Hallam, 2009/12/03
  • Re: [Amps] Dummy Loads & Wattmeters, DF3KV, 2009/12/03
  • Re: [Amps] Dummy Loads & Wattmeters, Gary Schafer, 2009/12/03
  • Re: [Amps] Dummy Loads & Wattmeters, Dr. David Kirkby, 2009/12/03
• Re: [Amps] Dummy Loads & Wattmeters, Gary Schafer, 2009/12/03
  • Re: [Amps] Dummy Loads & Wattmeters, Gary Smith, 2009/12/03
    • Re: [Amps] Dummy Loads & Wattmeters, david sutton, 2009/12/03
    • Re: [Amps] Dummy Loads & Wattmeters, Alex Eban, 2009/12/03
    • Re: [Amps] Dummy Loads & Wattmeters, Dr. David Kirkby, 2009/12/03
  • Re: [Amps] Dummy Loads & Wattmeters, Carl, 2009/12/03
    • Re: [Amps] Dummy Loads & Wattmeters, Gary Schafer, 2009/12/03

[Amps] Decent HF directional coupler for RF power meas., John Lyles, 2009/12/02

• Re: [Amps] Decent HF directional coupler for RF power meas., Jim Barber, 2009/12/02
  • Re: [Amps] Decent HF directional coupler for RF power meas., Gary Schafer, 2009/12/03

[Amps] power meters for HF/VHF, John Lyles, 2009/12/02

• Re: [Amps] power meters for HF/VHF, Ron Youvan, 2009/12/02
• Re: [Amps] power meters for HF/VHF, Dr. David Kirkby, 2009/12/02
• Re: [Amps] power meters for HF/VHF, Gary Schafer, 2009/12/02

[Amps] Dummy Loads & Wattmeters, David C. Hallam, 2009/12/02

• Re: [Amps] Dummy Loads & Wattmeters, Gary Schafer, 2009/12/02
• Re: [Amps] Dummy Loads & Wattmeters, Steve Katz, 2009/12/02
  • Re: [Amps] Dummy Loads & Wattmeters, David C. Hallam, 2009/12/02
  • Re: [Amps] Dummy Loads & Wattmeters, Dr. David Kirkby, 2009/12/02
    • Re: [Amps] Dummy Loads & Wattmeters, Lynn Osterbur, 2009/12/02
    • Re: [Amps] Dummy Loads & Wattmeters, Dr. David Kirkby, 2009/12/02
    • Re: [Amps] Dummy Loads & Wattmeters, Carl, 2009/12/02
    • Re: [Amps] Dummy Loads & Wattmeters, Alex Eban, 2009/12/02
    • Re: [Amps] Dummy Loads & Wattmeters, Dr. David Kirkby, 2009/12/03
    • Re: [Amps] Dummy Loads & Wattmeters, Roger, 2009/12/06
  • Re: [Amps] Dummy Loads & Wattmeters, Carl, 2009/12/02
    • Re: [Amps] Dummy Loads & Wattmeters, Jim Tonne, 2009/12/02
    • Re: [Amps] Dummy Loads & Wattmeters, Alex Eban, 2009/12/04
• Re: [Amps] Dummy Loads & Wattmeters, Steve Katz, 2009/12/02
• Re: [Amps] Dummy Loads & Wattmeters, Carl, 2009/12/03
  • Re: [Amps] Dummy Loads & Wattmeters, Gary Schafer, 2009/12/03
    • Re: [Amps] Dummy Loads & Wattmeters, Dr. David Kirkby, 2009/12/03

[Amps] Advice, Phil LaMarche, 2009/12/02

• Re: [Amps] Advice, n8de, 2009/12/02
• Re: [Amps] Advice, RICHARD SOLOMON, 2009/12/02
• Re: [Amps] Advice, Gudguyham, 2009/12/02
  • Re: [Amps] Advice, RICHARD SOLOMON, 2009/12/02
• Re: [Amps] Advice, Gudguyham, 2009/12/02
  • Re: [Amps] Advice, Carl, 2009/12/02
    • Re: [Amps] Advice, Roger, 2009/12/02
    • Re: [Amps] Advice, Carl, 2009/12/02
    • Re: [Amps] Advice, Roger, 2009/12/02
    • Re: [Amps] Advice, Bill, W6WRT, 2009/12/03
    • Re: [Amps] Advice, Carl, 2009/12/03
    • Re: [Amps] Advice, k7rdx, 2009/12/03
    • Re: [Amps] Advice, Roger, 2009/12/04
    • Re: [Amps] Advice, Carl, 2009/12/04
    • Re: [Amps] Advice, Roger, 2009/12/03
    • Re: [Amps] Advice, Bill, W6WRT, 2009/12/03
    • Re: [Amps] Advice, Carl, 2009/12/03
    • Re: [Amps] Advice, Ron Youvan, 2009/12/03
    • Re: [Amps] Advice, Bill, W6WRT, 2009/12/02
    • Re: [Amps] Advice, Roger, 2009/12/02
    • Re: [Amps] Advice, Bill, W6WRT, 2009/12/02
    • Re: [Amps] Advice, Carl, 2009/12/02
• Re: [Amps] Advice, Paul Decker, 2009/12/04
  • Re: [Amps] Advice, Bill, W6WRT, 2009/12/04
    • Re: [Amps] Advice, Gary Schafer, 2009/12/05
    • Re: [Amps] Advice, Carl, 2009/12/05
    • Re: [Amps] Advice, Jim Barber, 2009/12/05
    • Re: [Amps] Advice, Carl, 2009/12/05
• Re: [Amps] Advice, Paul Decker, 2009/12/05
  • Re: [Amps] Advice, Gary Schafer, 2009/12/05
    • Re: [Amps] Advice, Gary Schafer, 2009/12/05
    • Re: [Amps] Advice, Ron Youvan, 2009/12/05
  • Re: [Amps] Advice, Roger, 2009/12/05
• Re: [Amps] Advice, Paul Decker, 2009/12/05
  • Re: [Amps] Advice, Gary Schafer, 2009/12/05
• Re: [Amps] Advice, Paul Decker, 2009/12/05
  • Re: [Amps] Advice, Joe Subich, W4TV, 2009/12/05
    • Re: [Amps] Advice, Roger, 2009/12/05
    • Re: [Amps] Advice, Ron Youvan, 2009/12/06
    • Re: [Amps] Advice, Roger, 2009/12/06
    • Re: [Amps] Advice, Carl, 2009/12/06
    • Re: [Amps] Advice, Gary Schafer, 2009/12/06
    • Re: [Amps] Advice, Bill, W6WRT, 2009/12/06
    • Re: [Amps] Advice, Carl, 2009/12/07
    • Re: [Amps] Advice, Bill, W6WRT, 2009/12/07
    • Re: [Amps] Advice, Carl, 2009/12/07
    • Re: [Amps] Advice, Bill, W6WRT, 2009/12/07
    • Re: [Amps] Advice, Carl, 2009/12/07
    • Re: [Amps] Advice, Roger, 2009/12/07

[Amps] Titan II Pedestal, Bob Good, 2009/12/01

• Re: [Amps] Titan II Pedestal, Bill, W6WRT, 2009/12/01
• Re: [Amps] Titan II Pedestal, gdaught6, 2009/12/01

[Amps] Ep drop under load, Donald Fox, 2009/12/01

• Re: [Amps] Ep drop under load, Bill, W6WRT, 2009/12/02

[Amps] High Voltage wire, Roland AH6RR, 2009/12/01

• Re: [Amps] High Voltage wire, Robert Morris, 2009/12/01
  • Re: [Amps] High Voltage wire, Dave Harmon, 2009/12/01
• Re: [Amps] High Voltage wire, donroden, 2009/12/01
• Re: [Amps] High Voltage wire, Fern, 2009/12/01
• Re: [Amps] High Voltage wire, Alex Eban, 2009/12/01
• Re: [Amps] High Voltage wire, SECOPSYS, 2009/12/01
• Re: [Amps] High Voltage wire, Colin Lamb, 2009/12/01
  • Re: [Amps] High Voltage wire, Jim W7RY, 2009/12/01
    • Re: [Amps] High Voltage wire, Carl, 2009/12/02
    • Re: [Amps] High Voltage wire, Ron Youvan, 2009/12/02
    • Re: [Amps] High Voltage wire, Carl, 2009/12/02
• Re: [Amps] High Voltage Wire, Roland AH6RR, 2009/12/01
• Re: [Amps] High Voltage wire, Missouri Guy, 2009/12/01
  • Re: [Amps] High Voltage wire, bill price, 2009/12/01
• Re: [Amps] High Voltage wire, Dino Darling, 2009/12/01
• Re: [Amps] High Voltage wire, Dave White, 2009/12/03

Re: [Amps] SB-220: 1,800 Watts Output, Glen Zook, 2009/12/01

• Re: [Amps] SB-220: 1,800 Watts Output, Randall, Randy, 2009/12/01
• Re: [Amps] SB-220: 1,800 Watts Output, Bill, W6WRT, 2009/12/01
• Re: [Amps] SB-220: 1,800 Watts Output, Gudguyham, 2009/12/01
  • Re: [Amps] SB-220: 1,800 Watts Output, Jim Barber, 2009/12/01
  • Re: [Amps] SB-220: 1,800 Watts Output, Gary Schafer, 2009/12/01
    • Re: [Amps] SB-220: 1,800 Watts Output, Carl, 2009/12/01
  • Re: [Amps] SB-220: 1,800 Watts Output, Carl, 2009/12/01
    • Re: [Amps] SB-220: 1,800 Watts Output, Dave Harmon, 2009/12/01
  • Re: [Amps] SB-220: 1,800 Watts Output, Bill, W6WRT, 2009/12/01
• Re: [Amps] SB-220: 1,800 Watts Output, Gudguyham, 2009/12/01
• Re: [Amps] SB-220: 1,800 Watts Output, Gudguyham, 2009/12/01
• Re: [Amps] SB-220: 1,800 Watts Output, Steve Katz, 2009/12/01
  • Re: [Amps] SB-220: 1,800 Watts Output, Jim Barber, 2009/12/04
    • Re: [Amps] SB-220: 1,800 Watts Output, Ryan Foster, 2009/12/04
• Re: [Amps] SB-220: 1,800 Watts Output, Glen Zook, 2009/12/02