Amps
[Top] [All Lists]

Re: [Amps] Chinese DIN connectors

To: <K1SG@aol.com>, <amps@contesting.com>
Subject: Re: [Amps] Chinese DIN connectors
From: "Jeff Blaine AC0C" <keepwalking188@yahoo.com>
Date: Thu, 10 Dec 2009 02:07:38 -0600
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Steve,

I have ordered from rfsupplier quite a few times now.  Quite happy with the 
products and the service.

The only minor complaint I have seen is on a couple of the BNC plugs where 
the fit was not quite perfect - functional but not quite perfect.  Of 
course, at about 1/4 the cost of what I can get from Mouser et. al, it's 
easy to chuck the one you find troublesome and you are way ahead on the $$ 
side.  The SMA stuff has been great.

73/jeff/ac0c


--------------------------------------------------
From: <K1SG@aol.com>
Sent: Wednesday, December 09, 2009 11:41 PM
To: <amps@contesting.com>
Subject: [Amps] Chinese DIN connectors

> I need to get some 7-16 DIN connectors, and most of what I'm seeing is
> coming out of China. Does anyone have any experience with XTAR connectors, 
> or
> with rfsupplier.com in Shenzhen, Guangdong Province China?
>
> Steve  Gilbert
> K1SG
> K1SG@AOL.com
> FN42fe
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>