Amps Mailing List (date)

Amps Mailing List (date)

[Thread Index] [Top] [All Lists]

August 31, 2007

[Amps] Old Radiotron theory paper, John Lyles, 21:44
[Amps] Mil-Spec Fil Xfmr performance, Pat Barthelow, 14:40
Re: [Amps] rotary switch - shorting/non-shorting, Tom Rauch, 12:54
Re: [Amps] rotary switch - shorting/non-shorting, n7ka, 12:21
[Amps] [Fwd: Old GE docs on Radiotrons], Pete Lancashire, 11:16
Re: [Amps] rotary switch - shorting/non-shorting, Peter Chadwick, 04:16
Re: [Amps] rotary switch - shorting/non-shorting, David G4FTC, 01:08
[Amps] blower, Larry Ravlin, 00:01

August 30, 2007

[Amps] Old GE docs on Radiotrons, John Lyles, 17:53
Re: [Amps] rotary switch - shorting/non-shorting, Tom Rauch, 15:45
Re: [Amps] rotary switch - shorting/non-shorting, Bill Fuqua, 15:31
Re: [Amps] rotary switch - shorting/non-shorting, Alex Malyava, 14:51
Re: [Amps] rotary switch - shorting/non-shorting, Tom Rauch, 14:43
Re: [Amps] rotary switch - shorting/non-shorting, Alex Malyava, 14:24
[Amps] Needed 3CX800A7, Tom Rauch, 12:07
Re: [Amps] rotary switch - shorting/non-shorting, Tom Rauch, 10:27
Re: [Amps] T-R switching, Tom Rauch, 10:14
Re: [Amps] Amphenol Connectors made in China, Peter Chadwick, 04:54
Re: [Amps] Amphenol Connectors made in China, Peter Chadwick, 04:33
Re: [Amps] T-R switching, Steve Thompson, 02:59
Re: [Amps] rotary switch - shorting/non-shorting, David G4FTC, 01:38
[Amps] Use of temperature paints and crayons on tubes, John Lyles, 00:45

August 29, 2007

[Amps] T-R switching, kg7hf, 22:34
[Amps] Sell, Variacs, 5 ea, different, Pat Barthelow, 19:28
Re: [Amps] Silicon rubber chimneys, gdaught6, 19:23
[Amps] L4B FT920 Yaesu, Trent and Lorraine Sampson, 19:04
Re: [Amps] Silicon rubber chimneys, jeremy-ca, 19:02
[Amps] Sell, Air Socket, 4-1000A Family, Eimac SK 500, Pat Barthelow, 18:58
[Amps] Regulation issues when using a Variac, jeremy-ca, 18:51
[Amps] Sell, EF Johnson, Ceramic Sockets, 3-500Z family, Pat Barthelow, 18:42
[Amps] Sell, Jennings Vac Variable, Pat Barthelow, 18:37
[Amps] B&W 30 Amp Fil Choke FS, Pat Barthelow, 18:04
Re: [Amps] Silicon rubber chimneys, Roger, 17:49
Re: [Amps] Amphenol Connectors made in China, Gary Smith, 17:24
[Amps] China recalls ALL lead, Lee Wical, 16:56
Re: [Amps] Amphenol Connectors made in China, PlanerGuy, 16:45
Re: [Amps] Amphenol Connectors made in China, Administrator, 16:20
[Amps] Silicon rubber chimneys, Andy Pfeiffer, 15:58
[Amps] Made in China - Japan again?, Jim Tonne, 15:13
Re: [Amps] Amphenol Connectors made in China, David C. Hallam, 15:09
Re: [Amps] Amphenol Connectors made in China, EP Swynar, 14:46
Re: [Amps] Amphenol Connectors made in China, Tom Rauch, 14:45
Re: [Amps] Amphenol Connectors made in China, Tom Rauch, 14:42
[Amps] Amphenol Connectors made in China, Bill Fuqua, 13:50

August 28, 2007

Re: [Amps] GU74B in GG configuration, gdaught6, 14:21
Re: [Amps] SB cabinets, EP Swynar, 14:20
Re: [Amps] SB cabinets, Bryan Swadener, 13:52
[Amps] GU74B in GG configuration, Andy Pfeiffer, 10:44
[Amps] 8874 - 3CX400A7, Andy Pfeiffer, 08:31
Re: [Amps] gs-35b bias pb?, Steve Thompson, 07:28
Re: [Amps] rotary switch - shorting/non-shorting, Tom Rauch, 06:39
[Amps] gs-35b bias pb?, Flo, 06:04
[Amps] rotary switch - shorting/non-shorting, Alex Malyava, 05:44
Re: [Amps] GS-23B Tetrode, Ian White GM3SEK, 03:35
[Amps] Filament transformer question, Ed, 02:07
[Amps] SELL: 800 watt SB-200 for 6 meters, Gudguyham, 01:51
[Amps] temperature, W7lr, 00:16

August 27, 2007

[Amps] 700 pf 3kv caps?, George Cortez Jr, 21:00
[Amps] GS-23B Tetrode, N7SC, 20:46
[Amps] turns, Larry Ravlin, 20:16
Re: [Amps] sb 200 cabinet, Gudguyham, 18:53
Re: [Amps] sb cabinets, Tom Rauch, 18:35
[Amps] sb cabinets, c.s., 17:27
[Amps] SELL: Drake L4B Components, w2cqm@juno.com, 12:46
Re: [Amps] SB-200 circuit breakers, jeremy-ca, 11:54
Re: [Amps] Amps Digest, Vol 56, Issue 38, Edwin Karl, 11:47
Re: [Amps] 4cx1500b amp conversion, David C. Hallam, 08:45
Re: [Amps] SB-200 circuit breakers, Tom Rauch, 08:27
Re: [Amps] SB-200 circuit breakers, Tom Rauch, 08:06
[Amps] 4cx1500b amp conversion, Felipe Ceglia - PY1NB, 07:16
Re: [Amps] SB-200 circuit breakers, Gudguyham, 04:14
Re: [Amps] SB-200 circuit breakers, Gudguyham, 04:05
[Amps] Patent - was: Heat Dissipating 8877 HV Plate Caps, Peter Chadwick, 03:34

August 26, 2007

Re: [Amps] SB-200 circuit breaker, Dan Hearn, 23:39
Re: [Amps] SB-200 circuit breakers, jeremy-ca, 23:20
Re: [Amps] SB-200 circuit breaker, jeremy-ca, 23:09
[Amps] SB-200 circuit breaker, Tom Osborne, 21:52
Re: [Amps] SB-200 circuit breakers, Tom Osborne, 21:36
Re: [Amps] SB-200 circuit breakers, jeremy-ca, 20:28
Re: [Amps] SB-200 circuit breakers, Tom Osborne, 20:22
Re: [Amps] SB-200 circuit breakers, Gudguyham, 19:59
Re: [Amps] SB-200 circuit breakers, rgroh, 19:07
[Amps] SB-200 circuit breakers, Tom Osborne, 18:17
Re: [Amps] Future Amp Buyer Questions, jeremy-ca, 14:57
Re: [Amps] Future Amp Buyer Questions, Roger, 13:17
Re: [Amps] Future Amp Buyer Questions, EP Swynar, 13:09
[Amps] Future Amp Buyer Questions, vtnn43e, 12:39
[Amps] Quote of the day..., Chuck Adkins, 12:09
[Amps] Wanted: 200pFd Mica Capacitors, w2cqm@juno.com, 07:58
Re: [Amps] SELL: Heat Dissipating 8877 HV Plate Caps, David G4FTC, 05:29
Re: [Amps] SELL: Heat Dissipating 8877 HV Plate Caps, Roger, 04:33
Re: [Amps] SELL: Heat Dissipating 8877 HV Plate Caps, David G4FTC, 03:53
Re: [Amps] Heat Dissapating 8877 HV Plate Caps, Roger, 02:11
[Amps] ALPHA 77 Link Chain for the 2 x Load Capacitors, Thomas Carlsson, 00:49
Re: [Amps] SELL: Heat Dissipating 8877 HV Plate Caps, Tom Rauch, 00:30
Re: [Amps] Heat Dissapating 8877 HV Plate Caps, Tom Rauch, 00:03

August 25, 2007

Re: [Amps] SELL: Heat Dissipating 8877 HV Plate Caps, Gudguyham, 10:47
Re: [Amps] SELL: Heat Dissipating 8877 HV Plate Caps, n4dsp, 09:42
Re: [Amps] SELL: Heat Dissipating 8877 HV Plate Caps, jeremy-ca, 09:12
Re: [Amps] qsk, Jim Brown, 07:33
[Amps] SB-201 "King Conversion" to 6m ?, Hugh VA3TO, 07:29
Re: [Amps] SELL: Heat Dissipating 8877 HV Plate Caps, Gudguyham, 07:09
Re: [Amps] SELL: Heat Dissipating 8877 HV Plate Caps, Rod Elliott, 02:55
Re: [Amps] Heat Dissapating 8877 HV Plate Caps, Steve Thompson, 02:54
Re: [Amps] Heat Dissapating 8877 HV Plate Caps, n7ka, 01:45
[Amps] qsk, slonim aron, 01:14
Re: [Amps] Heat Dissapating 8877 HV Plate Caps, Fern Rivard, 00:21

August 24, 2007

Re: [Amps] Heat Dissapating 8877 HV Plate Caps, Gary Schafer, 22:56
[Amps] Heat Dissapating 8877 HV Plate Caps, robert briggs, 21:54
Re: [Amps] SELL: Heat Dissipating 8877 HV Plate Caps, jeremy-ca, 21:52
Re: [Amps] SELL: Heat Dissipating 8877 HV Plate Caps, Gudguyham, 21:41
Re: [Amps] SELL: Heat Dissipating 8877 HV Plate Caps, k7rdx, 17:56
Re: [Amps] SELL: Heat Dissipating 8877 HV Plate Caps, jeremy-ca, 17:15
Re: [Amps] Heathkit cabinets, jeremy-ca, 16:24
[Amps] Heathkit cabinets, c.s., 15:41
Re: [Amps] SELL: Heat Dissipating 8877 HV Plate Caps, David G4FTC, 15:24
Re: [Amps] Correct way to drive an amp with controlled carrier AM?, Tom Rauch, 11:07
Re: [Amps] Correct way to drive an amp with controlled carrier AM?, jeremy-ca, 09:06
Re: [Amps] Correct way to drive an amp with controlled carrier AM?, Tom Rauch, 07:35
[Amps] correct way to drive an amp with controlled carrier AM, kenw2dtc, 04:23

August 23, 2007

Re: [Amps] SELL: Heat Dissipating 8877 HV Plate Caps, Gary Schafer, 22:21
[Amps] SELL: Heat Dissipating 8877 HV Plate Caps, w2cqm@juno.com, 21:59
[Amps] Alpha 91b relay noise......, fraz1, 21:56
[Amps] Correct way to drive an amp with controlled carrier AM?, jeremy-ca, 21:37
[Amps] Fwd: Re: [BOATANCHORS-TEMPE] [Boatanchors] SmallestDual-6146 HF Transmitter?, Bill Fuqua, 13:38
Re: [Amps] Filament overwind on an EHT Toroidal, Radio WC6W, 12:23
Re: [Amps] Filament overwind on an EHT Toroidal, Ian White GM3SEK, 03:36
[Amps] Filament overwind on an EHT Toroidal, Glenn McNeil, 00:42

August 22, 2007

[Amps] need meter, ve2whz, 15:25
Re: [Amps] AL-811H maximum Ip, rgroh, 15:01
Re: [Amps] AL-811H maximum Ip, Tom Rauch, 14:32
Re: [Amps] (no subject), k7rdx, 13:35
Re: [Amps] AL-811H maximum Ip, Jan Ditzian, 12:48
Re: [Amps] AL-811H maximum Ip, Pat Barthelow, 12:31
Re: [Amps] AL-811H maximum Ip, Steve Katz, 11:56
[Amps] AL-811H maximum Ip, Jan Ditzian, 11:53
Re: [Amps] SELL: Jennings RJ1A SPDT Vacuum Relay, k7rdx, 11:13
[Amps] SELL: Jennings RJ1A SPDT Vacuum Relay, w2cqm@juno.com, 11:04
[Amps] SELL: Jenning SPDT RJ1A Vacuum Relay, w2cqm@juno.com, 10:58

August 21, 2007

[Amps] SELL: Drake L4B Antenna Changeover Relay, w2cqm@juno.com, 17:20
Re: [Amps] 8877 blower, Sam Effinger, 17:00
Re: [Amps] 3-500ZG warmig up, Gudguyham, 16:07
[Amps] 3-500ZG warmig up, Tomas Krejca, 16:01
Re: [Amps] 8877 blower, jeremy-ca, 15:16
[Amps] 8877 blower, Sam Effinger, 14:32
Re: [Amps] (no subject), David J Windisch, 05:59

August 20, 2007

Re: [Amps] (no subject), k7rdx, 22:03
[Amps] (no subject), w2cqm@juno.com, 21:30
[Amps] SELL: Drake L4B Front Panel Power Rocker Switch, w2cqm@juno.com, 14:04

August 19, 2007

Re: [Amps] wanted suitable blower for 8877 tube, jeremy-ca, 16:53
Re: [Amps] wanted suitable blower for 8877 tube, montytaylor, 13:28
Re: [Amps] wanted suitable blower for 8877 tube, Peter Voelpel, 11:41
Re: [Amps] wanted suitable blower for 8877 tube, David G4FTC, 10:52
Re: [Amps] wanted suitable blower for 8877 tube, jeremy-ca, 10:04
[Amps] SELL: Heath SB200 6M Retrofit Amplifier, w2cqm@juno.com, 07:53
Re: [Amps] wanted suitable blower for 8877 tube, Steve Thompson, 02:44
Re: [Amps] wanted suitable blower for 8877 tube, David G4FTC, 02:08
Re: [Amps] wanted suitable blower for 8877 tube, David G4FTC, 00:45

August 18, 2007

Re: [Amps] wanted suitable blower for 8877 tube, jeremy-ca, 22:29
Re: [Amps] wanted suitable blower for 8877 tube, Tom Rauch, 22:18
Re: [Amps] re specs on Rotron 110AS blower, Dan Hearn, 21:02
Re: [Amps] re specs on Rotron 110AS blower, Dan Hearn, 20:58
Re: [Amps] re specs on Rotron 110AS blower, Paul Kelley N1BUG, 20:53
Re: [Amps] wanted suitable blower for 8877 tube, jeremy-ca, 20:43
[Amps] re specs on Rotron 110AS blower, Fern Rivard, 20:35
Re: [Amps] wanted suitable blower for 8877 tube, Mike, K6BR, 19:27
Re: [Amps] wanted suitable blower for 8877 tube, Mike, K6BR, 19:21
[Amps] wanted suitable blower for 8877 tube, Fern Rivard, 18:48
[Amps] SELL: Heath SB200 Retrofited/ Dedicated 500W 6m Amplifier, w2cqm@juno.com, 07:45
Re: [Amps] parasitic excuses, Peter Chadwick, 03:55

August 17, 2007

Re: [Amps] Amps Digest, Vol 56, Issue 23, sv1iw_home, 13:11
[Amps] parasitic excuses, John Lyles, 11:28

August 16, 2007

[Amps] 8122 and parasitic excuses TSPA, John Lyles, 12:52
Re: [Amps] Amps Digest, Vol 56, Issue 22, sv1iw_home, 12:14
[Amps] SELL: Amplifier Components, w2cqm@juno.com, 08:44

August 15, 2007

Re: [Amps] Amps Digest, Vol 56, Issue 19, jeremy-ca, 22:29
Re: [Amps] Amps Digest, Vol 56, Issue 19, Manfred Mornhinweg, 22:20
[Amps] LK 500 ZA heat, jeremy-ca, 22:00
Re: [Amps] [Fwd: Re: LK 500 ZA heat], Gudguyham, 21:22
Re: [Amps] [Fwd: Re: LK 500 ZA heat], Tom Rauch, 21:17
[Amps] SB-200 ratings, jeremy-ca, 15:58
Re: [Amps] Amps Digest, Vol 56, Issue 20, sv1iw_home, 15:02
Re: [Amps] Amps Digest, Vol 56, Issue 20, Gudguyham, 13:47
Re: [Amps] Amps Digest, Vol 56, Issue 20, jeremy-ca, 13:12
Re: [Amps] [Fwd: Re: LK 500 ZA heat], Dick Green WC1M, 12:55
Re: [Amps] Amps Digest, Vol 56, Issue 20, Edwin Karl, 12:43

August 14, 2007

Re: [Amps] [Fwd: Re: LK 500 ZA heat], jeremy-ca, 22:26
Re: [Amps] [Fwd: Re: LK 500 ZA heat], Tom Rauch, 21:54
[Amps] [Fwd: Re: LK 500 ZA heat], alexander a. aimette, 21:23
Re: [Amps] Project for 8122 tubes, jeremy-ca, 15:17
[Amps] 8122, john . brewer, 15:06
Re: [Amps] Vacuum Packaged NOS tubes, Tom Rauch, 14:10
Re: [Amps] LK-500 ZA heat, Roger, 13:59
Re: [Amps] LK-500 ZA heat, Pat Barthelow, 13:53
Re: [Amps] LK-500 ZA heat, Colin Lamb, 13:35
Re: [Amps] LK-500 ZA heat, gdaught6, 13:09
[Amps] Testing 3CX800A, JOS Earthlink, 13:07
Re: [Amps] LK-500 ZA heat, kg7hf, 13:03
[Amps] Vacuum Packaged NOS tubes, Pat Barthelow, 12:54
Re: [Amps] Project for 8122 tubes, W0UN -- John Brosnahan, 12:46
Re: [Amps] Project for 8122 tubes, Pat Barthelow, 12:42
Re: [Amps] Project for 8122 tubes, jeremy-ca, 09:52
Re: [Amps] LK 500 ZA heat, jeremy-ca, 09:32
Re: [Amps] Project for 8122 tubes, Fuqua, Bill L, 09:23
Re: [Amps] LK 500 ZA heat, jeremy-ca, 09:23
Re: [Amps] LK-500 ZA heat, zl1aih, 07:43
[Amps] Project for 8122 tubes, sulai je, 06:08
Re: [Amps] LK 500 ZA heat, Tom Rauch, 05:30
Re: [Amps] LK 500 ZA heat, Peter Chadwick, 05:23
Re: [Amps] LK 500 ZA heat, Ian White GM3SEK, 03:01
Re: [Amps] LK 500 ZA heat, Chris Pedder, 02:13

August 13, 2007

Re: [Amps] LK 500 ZA heat, Roger, 23:07
Re: [Amps] LK 500 ZA heat, Roger, 22:45
Re: [Amps] LK 500 ZA heat, Tom Osborne, 22:20
Re: [Amps] LK 500 ZA heat, Tim Long, 22:05
Re: [Amps] LK 500 ZA heat, jeremy-ca, 21:16
Re: [Amps] LK 500 ZA heat, Sugiyama, 20:05
Re: [Amps] LK 500 ZA heat, jeremy-ca, 18:19
Re: [Amps] LK 500 ZA heat, jeremy-ca, 18:02
Re: [Amps] LK 500 ZA heat, Steve Thompson, 17:18
Re: [Amps] LK 500 ZA heat, Tom Rauch, 17:04
[Amps] 3-500 filament transformers, RICHARD GEORGE, 16:48
[Amps] LK-500ZA hot, Edwin Karl, 16:41
Re: [Amps] LK 500 ZA heat, Gary McAdams, 16:25
Re: [Amps] LK 500 ZA heat, jeremy-ca, 15:54
Re: [Amps] LK 500 ZA heat, Tom Rauch, 15:26
Re: [Amps] LK 500 ZA heat, Osten B Magnusson, 15:05
Re: [Amps] LK 500 ZA heat, jeremy-ca, 14:59
Re: [Amps] LK 500 ZA heat, Tom Rauch, 13:32
Re: [Amps] LK 500 ZA heat, jeremy-ca, 12:24
[Amps] LK 500 ZA heat, dave arruzza, 11:44

August 12, 2007

[Amps] need info re Hioki meters, Fern Rivard, 23:59

August 11, 2007

[Amps] SELL: Heath SB200 antenna tune capacitor, w2cqm@juno.com, 08:06
[Amps] SELL: Heath SB200 antenna tune capacitor, w2cqm@juno.com, 08:05
[Amps] Bird 43 power meter FS, Hsu, 05:10
[Amps] Emtron DX2 with 2xGU74b pse info, Dick, 04:18

August 10, 2007

[Amps] Yahoo! Groups: You're invited! Join amateur-radio-amps today., amateur-radio-amps moderator, 10:06

August 09, 2007

Re: [Amps] Amps for sale, Steve Thompson, 17:29
Re: [Amps] Amps for sale, Roger, 15:07
[Amps] Amps for sale, Steve Thompson, 14:28
[Amps] It's working! Was( Tokyo HL-1.5KFX Yaesu pinout), Roger, 00:36

August 08, 2007

[Amps] Alpin 100/GU74b contest performance?, Dick, 16:41
Re: [Amps] AL-1500, Gudguyham, 12:33
Re: [Amps] AL-1500, jeremy-ca, 12:31
[Amps] Alpha 9500, Tom Anderson, 11:31
Re: [Amps] AL-1500, Robert B. Bonner, 11:14
[Amps] AL-1500, Gregg Seidl, 10:59
[Amps] 1KD-5 pdf files., Tyrone Burns Sr., 10:05
Re: [Amps] 1625SS, jeremy-ca, 09:07
Re: [Amps] 1625SS, Peter Chadwick, 03:52

August 07, 2007

Re: [Amps] Emtron DX2 blows ac fuse on going TX, Robert B. Bonner, 21:59
Re: [Amps] Tokyo HL-1.5KFX Yaesu pinout, Roger, 21:40
Re: [Amps] Emtron DX2 blows ac fuse on going TX, Tom Osborne, 21:03
Re: [Amps] 1625SS, Karl-Arne Markström, 13:56
Re: [Amps] 1625SS, jeremy-ca, 13:19
[Amps] 1625SS, k7fm, 09:41

August 06, 2007

[Amps] Swap Bird thruline slug 250H, Martin Sole, 20:50
Re: [Amps] Alpha 89 Fuse Blowing, jeremy-ca, 19:22
Re: [Amps] Alpha 89 Fuse Blowing, Dick Green WC1M, 15:44
Re: [Amps] Alpha 89 Fuse Blowing, Dick Green WC1M, 15:39
Re: [Amps] Alpha 89 Fuse Blowing, Dick Green WC1M, 15:33
Re: [Amps] Alpha 89 Fuse Blowing, jeremy-ca, 15:24
Re: [Amps] Alpha 89 Fuse Blowing, Dick Green WC1M, 15:17
[Amps] Heathkit HL-2200 Diminished receive., Bruce Osterberg, 05:48

August 05, 2007

Re: [Amps] Emtron DX2 blows ac fuse on going TX, k7rdx, 17:13
[Amps] Alpha 89 Fuse Blowing, Robert Carroll, 16:35
[Amps] Emtron DX2 blows ac fuse on going TX, dl4seq, 15:49

August 04, 2007

[Amps] (no subject), roller, 23:28
[Amps] Macaw Model PRM-1 Wattmeter, Bruce Lanning, 19:22
[Amps] Manual or schematic for Macaw PRM-1, Bruce Lanning, 17:31

August 03, 2007

[Amps] cabinets, c s, 14:59
Re: [Amps] SELL: Collins 30L1 Capacitor board, w2cqm@juno.com, 09:57
[Amps] e-mail, 4X4DK-AMI SHAMI, 02:08
[Amps] (no subject), 4X4DK-AMI SHAMI, 02:07

August 01, 2007

[Amps] WTB Dentron meter, RICHARD GEORGE, 18:36
[Amps] SSB transmitter rebuilt, Hsu, 10:03