[Amps] SB-200 circuit breaker

["Tom Osborne" <w7why@verizon.net>]

Hi Carl

I did that and the caps are barely warm, but the bleeders are really hot. 
Too hot to touch.

Tom W7WHY


> - Leaky filter caps. A very good possibility if they are original. Leave
> the  amp on for a half hour or so and then shut off. Make sure the >HV is 
> down to  zero and pull the plug. Feel the caps. If they are more >than 
> just barely  warm they should be replaced. 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps