Marshall,
It sounds simple, but its not economically sound. If the mfgr adds 222 MHz it
cannot be marketed in much of the world. Many countries have laws similar to
the FCC "type acceptance" and if the 222 band is included it will not be
allowed to be imported into many of those countries at all. This would mean
the mfgrs would need design and build several different versions. A single
band rig or several versions of a multi-band VHF/UHF rig are about the only
options and for a Region 2 only market, the single band is about the most cost
effective choice.
de K3SK
-----Original Message-----
From: Marshall-K5QE <k5qe@k5qe.com>
Sent: Monday, May 22, 2023 4:26 PM
To: vhfcontesting@contesting.com
Subject: Re: [VHFcontesting] Icom & 222 Activity
Why anyone would want a single band all-mode 222 rig is beyond me.....just
another big box that I need to find a power supply for and space on the
operating desk for. What we need is a rig that has 6M, 2M, 222, and 432 in
it(for sales purposes, you would probably have to have HF too). We have the
IC706MK2G series of radios(the 706, 7000, and its successors, and the Icom 9100
series rigs). If the rig makers can make a rig that works on 2M and 432, they
can make a rig with 222MHz on it. Maybe it would only make 25W, but that would
be FB as it is enough to drive a big TE Systems amp or a solid state 222
palette amp.
Adding 222 to a rig that already has 6M, 2M, and 432, just cannot be a serious
engineering challenge. However, we just don't seem to be able to get I, K, or
Y to do that.
73 Marshall K5QE
On 5/22/2023 5:53 PM, peter h via VHFcontesting wrote:
> I just sent icom Sales an e-mail, requesting same.
> Bt73Pete, n6ze
>
>
> Sent from the all new AOL app for iOS
>
>
> On Monday, May 22, 2023, 06:25,k3sk@buckwalter.co <k3sk@buckwalter.co>
> wrote:
>
> I cornered Icom at Hamvention this past weekend and ask if they were ever
> going to offer another 222 multi-mode. The initial response I got was that I
> was the 3rd or 4th person that had asked that that day! Then after
> educating them a little on the current SSB/CW/FT8 activity and telling them
> about the recent selling prices on used IC-375A, they seemed interested and
> said this was something that would be brought up at post Hamvention
> discussions with ICOM HQ. This is a good start, but unless everyone
> starts contacting them to put a little pressure in their marketing, I
> wouldn't hold my breath.
>
> de K3SK
>
> -----Original Message-----
> From: David Olean<k1whs@metrocast.net>
> Sent: Sunday, May 21, 2023 9:37 AM
> To: Howard Reynolds<wa3eoq@gmail.com>;vhfcontesting@contesting.com
> Subject: Re: [VHFcontesting] 222 Activity
>
> Hi Howard
>
> Do not forget that W1GHZ has an inexpensive transverter ckt board available
> and you can populate it thru a Bill of Materials list from Mouser. Cheap n
> Easy! WW1M and I are going to build one. I think he has ordered two boards
> for us. You do have to supply the LO but most people use those synthesizer
> boards available from DEMI and Q5 Signal. We will report back as things
> progress. Now I know that many people have no time, and others go cross-eyed
> trying to work with surface mount parts, but I have had good luck with SM
> parts so far. Magnifier glasses and laying off hard drugs helps.
>
> I would agree that the 222 band needs a commercial stand alone rig for many
> folks, but in the past, activity on 222 was miniscule. Manufacturers could
> not make any money on a 222 rig. Possibly a 222 MHz band could be added now
> with technology where it is, with much less effort. I would always go the
> transverter route with a high end HF rig rather than a VHF multi mode rig
> just because you get more bang for the buck, but many people have the
> opposite opinion.
>
> I hope the activity keeps growing on 222 MHz. Increased activity and the
> attendant "chatter" will let folks know that 222 is a viable choice. 222 is a
> great VHF band. If it was world wide, it would be jam packed!
>
> Dave K1WHS
>
>
>
> On 5/20/2023 4:46 PM, Howard Reynolds wrote:
>> I fully realize that the root cause of no 222 MHz radios is that the
>> band is only available in Region 2 (and the manufacturers aren't).
>> However, every once in a while a radio with 222 MHz appears such as
>> the IC-375 or the Yaesu FT-736R. It's FM, but I've had a Kenwood
>> TM631A (144 and 220) and an Icom IC-37 for years. Anyway, I keep
>> hoping that, with sufficient activity in Region 2, the almighty
>> dollar sign will be ignored. WA3EOQ
>> _______________________________________________
>> VHFcontesting mailing list
>> VHFcontesting@contesting.com
>> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>
>
>
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|