John:
My tower is topped with a Bencher Skyhawk tribander where I grounded all
the parasitics to the boom. I also shunt feed the tower on 160M. FWIW.
73 de Gene Smar AD3F
Sent from my Radio Shack TRS-80 model 100 laptop
On Sat, Aug 13, 2022 at 6:14 PM, john@kk9a.com<john@kk9a.com> wrote: With a
half sloper the tower becomes a radiator. Whether it works well or
not is very dependent on the tower structure.
John KK9A
From: Gene Smar AD3F wrote:
TT:
I do what Chuck does for 80M - half-sloper wire - 1/4 wl long - hung
off
the tower from about 50 FAGL. Coax shield to tower, center conductor to
sloper
wire. It works well, i.e. low SWR except at upper band edge, and work what
I
hear.
73 de
Gene Smar AD3F
On Sat, Aug 13, 2022 at 1:48 PM, Chuck Dietz<w5prchuck@gmail.com> wrote:
Won't need a tuner if the wire is cut to a quarter wavelength on 80. This
is called a "Half-Sloper" or "Quarter Wave" sloper. Should be plenty of
information about them online. Great DX antenna.
Chuck W5PR
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|