Thanks. Appreciate your response.
Fred K3BHX
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of K7LXC@aol.com
Sent: Tuesday, April 13, 2010 2:01 PM
To: towertalk@contesting.com; fserota@msn.com
Subject: Re: [TowerTalk] Where should the nuts go?
In a message dated 4/13/2010 10:20:10 A.M. Pacific Daylight Time,
towertalk-request@contesting.com writes:
> Just putting up a new TX455. The base plate comes with 3 nuts on each
long
bolt embedded in the concrete. Question is: Do 2 nut belong below the
baseplate for locking the level, and one nut above the plate, or the other
way around with one nut below and 2 nuts above?
The weight of the tower will keep the bottom nuts from going anywhere.
You double nut the top of the bolts to make sure they won't go anywhere
either.
Cheers,
Steve K7LXC
TOWER TECH
UST Factory authorized installer
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|