I do not know of any drawings with exact measurements. The installation
directions that come with it do not have that kind of detail. If you cannot
get drawings from the factory, let me know and I will go out and measure
what you need. I can tell you it is very heavy duty, probably weighs close
to 100 pounds. I am 5'9" and the main upright is taller than I am and the
attachment for the legs are at eye height. It forms a triangle with the base
plate attachment that brings the upright to 90 degrees. Takes very heavy
duty bolts, I think 3/4 or 1" whichever needs a 1" socket.
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Dale M
Sent: Tuesday, April 13, 2010 2:33 PM
To: towertalk@contesting.com
Subject: [TowerTalk] TRX80
I am looking for some information on the TRX80 raising fixture. what is the
overall length, how far from the bottom are the holes for the support arms,
what size is the upright and how thick is the material the upright is made
from?
Dale K8NKE
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towert
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|