Towertalk
[Top] [All Lists]

Re: [TowerTalk] Where should the nuts go?

To: "Tower and HF antenna construction topics." <towertalk@contesting.com>, towertalk@contesting.com, fserota@msn.com
Subject: Re: [TowerTalk] Where should the nuts go?
From: Alan Swinger <awswinger@earthlink.net>
Reply-to: Alan Swinger <awswinger@earthlink.net>, "Tower and HF antenna construction topics." <towertalk@contesting.com>
Date: Tue, 13 Apr 2010 17:29:36 -0400 (GMT-04:00)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Yep; thats how I did my TX 472 - 1 under, 2 on top.
73, alan K9MBQ


-----Original Message-----
>From: K7LXC@aol.com
>Sent: Apr 13, 2010 2:00 PM
>To: towertalk@contesting.com, fserota@msn.com
>Subject: Re: [TowerTalk] Where should the nuts go?
>
> 
>In a message dated 4/13/2010 10:20:10 A.M. Pacific Daylight Time,  
>towertalk-request@contesting.com writes:
>
>>  Just putting up a new TX455. The base plate comes with 3  nuts on each 
>long
>bolt embedded in the concrete. Question is: Do 2 nut  belong below the
>baseplate for locking the level, and one nut above the  plate, or the other
>way around with one nut below and 2 nuts  above?
> 
>    The weight of the tower will keep the bottom nuts  from going anywhere. 
>You double nut the top of the bolts to make sure they  won't go anywhere 
>either. 
> 
>Cheers,
>Steve    K7LXC
>TOWER TECH
>UST Factory authorized installer 
>
>
>
> 
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>