I bet it's real pretty too. LOL! You can twist RG58 center conductor and
shield
together and put a wire nut on them too and it will work.
Doesn't mean I would want to do it.
Dave
n4zkf
-----Original Message-----
From: Dubovsky, George [mailto:George.Dubovsky@andrew.com]
Sent: Thursday, August 28, 2008 4:54 PM
To: D. Calder; towertalk@contesting.com
Subject: RE: [TowerTalk] Splicing LDF4
Yeah, yeah, yeah...
It will not be correct, but it works just fine at HF, thank you.
73,
geo - n4ua
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of D. Calder
Sent: Thursday, August 28, 2008 4:17 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Splicing LDF4
In the cell industry there is two splices on every run. Usually 1/2"
jumper
from the cabinet to the ground buss polyphasers where it then transitions to
1 5/8". It then goes up the tower to another 5'
or 6' 1/2" jumper to the antenna.
All connectors. If you try and splice it without one, you don't have any
business using the 1/2" to begin with. IT WILL not be correct.
73 Dave
n4zkf
----------------------------------------------------------------------------
--------------------
This message is for the designated recipient only and may contain
privileged, proprietary, or otherwise private information.
If you have received it in error, please notify the sender immediately and
delete the original. Any unauthorized use of this email is prohibited.
----------------------------------------------------------------------------
--------------------
[mf2]
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|