Yeah, yeah, yeah...
It will not be correct, but it works just fine at HF, thank you.
73,
geo - n4ua
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of D. Calder
Sent: Thursday, August 28, 2008 4:17 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Splicing LDF4
In the cell industry there is two splices on every run. Usually 1/2"
jumper
from the cabinet to the ground buss polyphasers
where it then transitions to 1 5/8". It then goes up the tower to
another 5'
or 6' 1/2" jumper to the antenna.
All connectors. If you try and splice it without one, you don't have any
business using the 1/2" to begin with. IT WILL
not be correct.
73 Dave
n4zkf
------------------------------------------------------------------------------------------------
This message is for the designated recipient only and may
contain privileged, proprietary, or otherwise private information.
If you have received it in error, please notify the sender
immediately and delete the original. Any unauthorized use of
this email is prohibited.
------------------------------------------------------------------------------------------------
[mf2]
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|