Towertalk
[Top] [All Lists]

Re: [TowerTalk] Tailtwister Rotor wires

To: Artmouton <k5fnq@cox.net>
Subject: Re: [TowerTalk] Tailtwister Rotor wires
From: Richards <jruing@ameritech.net>
Date: Mon, 04 Aug 2008 22:56:14 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Oh man... that IS a dilemma.   Even if you follow the chart at the
controller end exactly,  you still have the logical possibility it is wired
wrong at the high end.    If you do have the guy climb it, have him take
pictures, as well as write down the color scheme.

Sorry I cannot answer your question - but I can validate it as a very
solid concern.   I will say my prayers and hopefully the note slip
will surface.

Good luck.  You were a good friend to help out like that.

  ====  K8JHR  ===

-------------------------------------------------------------------------------------



Artmouton wrote:

> I see in the manual a way to check resistance on the wires.
> Is this the only way to try and figure out the wiring or do I have to get 
> someone up the tower to check?

> Yeah it was a dumb move, but all for a good cause at the time.


=================================================
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>