Topband
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: Topband: I need help proofing an Inverted L model I made please. 40

from [Carl Luetzelschwab] [Permanent Link][Original]
To: "wi6x.73@gmail.com" <wi6x.73@gmail.com>
Subject: Re: Topband: I need help proofing an Inverted L model I made please. 40’ x 143’, four 100’ radials, #14 wire.
From: Carl Luetzelschwab <carlluetzelschwab@gmail.com>
Date: Wed, 9 Dec 2020 17:58:39 -0500
List-post: <mailto:topband@contesting.com> 
Jim,

It looks like you connect wires to lossy ground. Do you have the NEC-4
engine with your EZNEC ver 6.0?

Carl K9LA
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: Topband: I need help proofing an Inverted L model I made please. 40’ x 143’, four 100’ radials, #14 wire., Dave Cuthbert
Next by Date:  Re: Topband: I need help proofing an Inverted L model I made please. 40’ x 143’, four 100’ radials, #14 wire., Raymond Benny
Previous by Thread:  Re: Topband: I need help proofing an Inverted L model I made please. 40’ x 143’, four 100’ radials, #14 wire., WI6X
Next by Thread:  Re: Topband: I need help proofing an Inverted L model I made please. 40’ x 143’, four 100’ radials, #14 wire., Raymond Benny
Indexes:  [Date] [Thread] [Top] [All Lists]