| To: | <topband@contesting.com> |
|---|---|
| Subject: | Re: Topband: Modeling "Ground" and losses |
| From: | "Richard Fry" <rfry@adams.net> |
| Reply-to: | Richard Fry <rfry@adams.net> |
| Date: | Wed, 25 Feb 2015 08:58:58 -0600 |
| List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
Additional from the BL&E paper on the subject of standing waves on buried
radial wires...
Figure 11 linked below is based on the r-f currents measured along the radial lengths shown in Figure 7. http://s20.postimg.org/k05j5r3al/BL_E_Fig_11.jpgR. Fry _________________ Topband Reflector Archives - http://www.contesting.com/_topband |
| Previous by Date: | Topband: Modeling "Ground" and losses, K1FZ-Bruce |
|---|---|
| Next by Date: | Re: Topband: Modeling "Ground" and losses, Jim Brown |
| Previous by Thread: | Topband: Modeling "Ground" and losses, K1FZ-Bruce |
| Next by Thread: | Re: Topband: Modeling "Ground" and losses, Guy Olinger K2AV |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
