To: | topband@contesting.com, Richard Fry <rfry@adams.net> |
---|---|
Subject: | Topband: Modeling "Ground" and losses |
From: | "K1FZ-Bruce" <k1fz@myfairpoint.net> |
Reply-to: | k1fz@myfairpoint.net |
Date: | Wed, 25 Feb 2015 09:42:49 -0500 |
List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
Earth resistance/voltage would not necessarily be exactly the same for each radial, depending upon the earth site.. If memory serves me correctly, think it was W7EL who found standing waves on some radials 73 Bruce-K1FZ This measurement yielded the current in a single wire. To obtain the current flowing in all the buried wires at distance, x, the measured value was multiplied by the number of wires." R. Fry _________________ Topband Reflector Archives - http://www.contesting.com/_topband _________________ Topband Reflector Archives - http://www.contesting.com/_topband |
Previous by Date: | Re: Topband: Modeling "Ground" and losses, shristov |
---|---|
Next by Date: | Re: Topband: Modeling "Ground" and losses, Richard Fry |
Previous by Thread: | Re: Topband: Modeling "Ground" and losses, shristov |
Next by Thread: | Re: Topband: Modeling "Ground" and losses, Richard Fry |
Indexes: | [Date] [Thread] [Top] [All Lists] |