Re: Topband: Modeling "Ground" and losses

[shristov <shristov@ptt.rs>]

Tom W8JI <w8ji@w8ji.com> wrote:

> > Of interest here is that the benchmark Brown, Lewis and Epstein I.R.E 
> > paper on ground systems does not show such standing waves along buried 
> > radials (clip below).

> Of interest down here is surface-buried radials down here show definite 
> standing waves in actual measurements, so it doesn't care what BL and E 
> measured.


Their Fig. 7 shows results of simplified (manual) calculations, not measurement 
results.


73,

Sinisa  YT1NT, VE3EA
_________________
Topband Reflector Archives - http://www.contesting.com/_topband