Topband
[Top] [All Lists]

Re: Topband: 2 wire beverage question

To: "Richard \(Rick\) Karlquist" <richard@karlquist.com>
Subject: Re: Topband: 2 wire beverage question
From: "ZR" <zr@jeremy.mv.com>
Date: Thu, 29 Nov 2012 20:09:56 -0500
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Sounds like a problem many would love to have!

When you say they work best at 1-3' how exactly do you mean and what are the antenna details?
Getting more info on what others use is always good.

Carl
KM1H


----- Original Message ----- From: "Richard (Rick) Karlquist" <richard@karlquist.com>
To: "Mike Waters" <mikewate@gmail.com>
Cc: "topband" <topband@contesting.com>
Sent: Thursday, November 29, 2012 6:06 PM
Subject: Re: Topband: 2 wire beverage question




On 11/29/2012 8:14 AM, Mike Waters wrote:
Rick,

Why don't you just mount them on permanent posts (or trees) 10' high?
That's what I and many others do. That ought to let you mow around them
without taking them down. My support posts are 100' apart.


Thanks for the suggestions, but...

First, I have found that Beverages work better at 1 to 3 feet
off the ground than at 10 feet.  Second, while mowing around the
posts is better than having to go around the whole wire, it is
still too much of a hassle.  I am using a brushhog, not a zero
turn radius mower.  After mowing, I would have to use
the weed whacker around the posts.  Third, I am planning to
disc the area next year, so I would have to take out the posts.
The beverages are basically in a treeless area.

73

Rick N6RK
_______________________________________________
Topband reflector - topband@contesting.com


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1427 / Virus Database: 2634/5426 - Release Date: 11/29/12


_______________________________________________
Topband reflector - topband@contesting.com

<Prev in Thread] Current Thread [Next in Thread>