Have you ever thought of using a 2-wire bi-directional Beverage? They are
not complex at all. It only takes one more wire, two more simple
transformers, and one more run of coax. A remote relay and four extra parts
even lets you use just one run of coax for both directions.
If you run a single wire Beverage in the opposite direction, then you have
to put up twice as many supports (unless you have trees). But with a
two-wire Beverage, you can use the same supports for both directions.
73, Mike
http://www.w0btu.com/Beverage_antennas.html
On Fri, Nov 9, 2012 at 3:00 PM, Buck wh7dx <wh7dx@hawaii.rr.com> wrote:
>
> Use RG-6 line in the future and run another Beverage in the opposite
> direction - NW.
>
_______________________________________________
Topband reflector - topband@contesting.com
|