> -----Original Message-----
> From: topband-bounces@contesting.com
> [mailto:topband-bounces@contesting.com]On Behalf Of Barry Gross
> Sent: Saturday, August 20, 2005 10:00 PM
> To: topband@contesting.com
> Subject: Re: Topband: 160 AM BCB filter
>
>
> On 8/21/05, Jim McDonald <jim@n7us.net> wrote:
>
> > I haven't tried it but W3NQN also has a receive-only, BCB high-pass filter
> > with better specs.
>
> A good comparison showing the superiority of the AM Brick Wall filter
> over the NQN filter for this application was included on the web page
> originally cited by W0UN.
>
> 73,
> Barry N1EU
I don't see any mention of the 'NQN BCB High Pass Filter
(http://www.arraysolutions.com/Products/BCB%20RF%20Filters.htm#top%20of%20pageon)
on the web page. The discussion of the W3NQN product is of
the 160M Bandpass Filter. The only BCB filter he compares
to is the ICE 402X.
73,
Jeff K8ND
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|