Greg’s suggestion to check the RX antenna switch position is also a good first
thing to do prior to doing the tests I suggested.
Gary
> On Apr 3, 2018, at 10:11 AM, MadScientist1948 <dukeshifi@comcast.net> wrote:
>
> Te fact that you get TX output tells you that the Local Oscillator is OK.
>
> Do the tests I suggested and please report back.
>
> Gary
>
>
>
>> On Apr 3, 2018, at 10:06 AM, Greg S via TenTec <tentec@contesting.com> wrote:
>>
>> Rx antenna?
>> --------------------------------------------
>> On Tue, 4/3/18, Paul DeWitte <k9ot@yousq.net> wrote:
>>
>> Subject: [TenTec] Omni VI+
>> To: tentec@contesting.com
>> Date: Tuesday, April 3, 2018, 10:07 AM
>>
>> Good morning all, turned on my Omni VI+ this
>> morning and I have no
>> receive audio of rf signals.
>> What I do have is atmospheric noise on
>> all bands but no signals either
>> SSB or CW.
>>
>> I have tried master reset twice.
>> Checked for loose connections inside
>> with no luck.
>>
>> I do have TX output.
>>
>> Corsair II on same antennas work fine.
>>
>> Any suggestions?
>>
>> Thannks,73
>> Paul K9OT
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|