On 5/15/2014 7:45 PM, Carter wrote:
Again, bond all equipment together at the power supply and forget abt
a dedicated external ground.
I can try removing the external ground. I currently have 3/4" wide
single piece of braid going from the radio to the PS to the amp to an
outside ground (total length from last unit in line to the hole in the
basement wall is less than 5 feet).
The proper bonding is CHASSIS-TO-CHASSIS of interconnected equipment.
One of those chassis MUST be bonded to the power system green wire, to
the antenna system entry panel, to the power system ground, and to all
other grounds in the building.
73, Jim K9YC
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|