On Wed, 2008-02-06 at 15:40 -0600, Stuart Rohre wrote:
> An old time repeater and two way guy I know is going to check his records,
> but he said to make sure the Micor is not a magnetically regulated
> transformer. IF it is, it would have a capacitor of high voltage across the
> transformer winding.
>
> Certainly the diodes in series will work; the bucking filament transformer
> might work. You would use half of the center tapped 6.3 VAC transformer in
> series with the primary of the Micor, and its primary on the AC line. The
> current rating must be equal or greater than the primary current of the
> Micor.
>
> -Stuart
> K5KVH
>
>
If its not magnetically regulated, dropping the input by 3 volts will
drop the output by 0.38 volts. Might need more drop that that.
73, Jerry, K0CQ
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|