Yeah, but editing messages like this one is EASY (and done aready). You can
let me know about any messages you see come up which are confusing,
incomplete, or in error. There are character length constraints, but I can
easily fix these things. As a matter of fact I will WELCOME and easy fix for a
change!
--
73 es God Bless de KK1L...ron rossi(kk1l@arrl.net) <><
Support Programmer for TRLog http://www.qth.com/tr
QTH: Jericho, Vermont
My page: http://www.qsl.net/kk1l
>Yeah, I noticed that, too, but thought I'd wait to report it until Ron
>complains that he has nothing left to work on!
>
>73,
>Ed - W0YK
>
>
>> -----Original Message-----
>> From: trlog-admin@contesting.com [mailto:trlog-admin@contesting.com]On
>> Behalf Of Robert Brandon
>> Sent: Thursday, December 05, 2002 11:16 AM
>> To: 'TRLog Reflector'
>> Subject: RE: [TRLog] Why no Ctrl-Fx keys in exchange mode?
>>
>>
>> You're right! It's just that the instructions at the bottom of the
>> screen say only:
>> "Press ex function key to program <F3-F12, AltF1-AltF12, or ESCAPE to
>> exit>:"
>>
>> This is different from the CQ instructions which way,
>> "Press CQ function key to program <F1, AltF1, CtrlF1>, or ESCAPE to
>> exit."
>>
>> -----Original Message-----
>> From: J. Edward (Ed) Muns [mailto:w0yk@msn.com]
>> Sent: Thursday, December 05, 2002 11:38 AM
>> To: Robert Brandon; 'TRLog Reflector'
>> Subject: RE: [TRLog] Why no Ctrl-Fx keys in exchange mode?
>>
>> Ctrl-F keys are already available in Exchange mode. It is documented in
>> manual 6.63, page 140, and I use them all the time.
>>
>> 73,
>> Ed - W0YK
>>
>>
>> > -----Original Message-----
>> > From: trlog-admin@contesting.com [mailto:trlog-admin@contesting.com]On
>> > Behalf Of Robert Brandon
>> > Sent: Thursday, December 05, 2002 8:58 AM
>> > To: 'TRLog Reflector'
>> > Subject: [TRLog] Why no Ctrl-Fx keys in exchange mode?
>> >
>> >
>> > In CQ mode, there are three sets of programmable keys -- plain F1-F10,
>> > Alt-F1-F10, and Ctrl-F1-F10. In exchange mode, however, only plain F
>> > keys and Alt-F keys are available. I had in mind to set up Ctrl-F
>> keys
>> > for second radio fills, etc.. Would it be possible to add Ctrl-F keys
>> > in exchange mode?
>> >
>> > Robert K5PI
>> >
>> > -----Original Message-----
>> > From: trlog-admin@contesting.com [mailto:trlog-admin@contesting.com]
>> On
>> > Behalf Of Mike Gilmer, N2MG
>> > Sent: Thursday, December 05, 2002 6:26 AM
>> > To: U.Lautenbach@OLG-Senate-Kassel.Justiz.Hessen.de
>> > Cc: TRLog Reflector
>> > Subject: Re: Antwort: Re: [TRLog] Why?
>> >
>> > N2MG wrote:
>> > > > Also, some of the CW messages (F1 and F2 in exchange) are not
>> > > > accessible/editable from ALT-P - only in the cfg file. Why is
>> that?
>> >
>> > DL2ZAZ wrote:
>> > > They are accessed by Alt-P O because they can also be sent by the
>> > enter
>> > > key.
>> >
>> > OK, I do see why F1 on ALT-P E is like it is (it's "MYCALL" and should
>> > be
>> > setup in cfg and probably NOT changed mid-contest) Also, F2 has two
>> > settings, so allowing access on that page might be ugly. However since
>> > both
>> > F2 choices ARE accessible via ALT-P O it should SAY this on the ALT-P
>> E
>> > page - there IS enough room. The way the ALT-P E page is laid out it
>> > looks
>> > like both F2 and F1 are only available in the cfg. I realize this can
>> > be
>> > "learned" but it would make it easier for new TR users.
>> >
>> > Mike N2MG
>> >
>> >
>> > _______________________________________________
>> > TRLog mailing list
>> > TRLog@contesting.com
>> > http://lists.contesting.com/mailman/listinfo/trlog
>> >
>> >
>> > _______________________________________________
>> > TRLog mailing list
>> > TRLog@contesting.com
>> > http://lists.contesting.com/mailman/listinfo/trlog
>> >
>>
>>
>>
>> _______________________________________________
>> TRLog mailing list
>> TRLog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/trlog
>>
>
>_______________________________________________
>TRLog mailing list
>TRLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/trlog
|