If you will down load a program called MPFilters at:
http://www.qsl.net/va3cr/main/mpfilters.htm
You get a 1000MP filter panel on your computer screen and can set any
filter or combination of filters on an MP-1000/1000mark5/ or field on any
mode. Works on com 1-6. Only draw back is filters need to be set prior to
bring up any program using rig control.
73, Ed W4EP
(Thanks Jerry NO2T for turning me on to this)
At 10:11 PM 7/9/02 -0500, you wrote:
> > This looks cut and dried, but the fella is telling me the carrier does not
> > shift in frequency. Is there something he's not setting?
>
>A common mistake here is to have the front panel PKT button depressed. In
>this case, PTT will key, but there is no Baudot input to the PACKET
>connector, so it just sits there with a constant tone. He needs to be sure
>that the RTTY button is depressed.
>
>Similarly, if you want to run AFSK RTTY (I don't know why you would with
>this rig), be sure you have the PKT button depressed. It might not seem
>intuitive at first, but that's the way it works - PKT selects input from the
>PACKET connector, and RTTY selects input (FSK on SHIFT PIN) from the RTTY
>connector.
>
>If my memory serves right, in contrast to the 1000MP (not MARK-5), you can't
>use narrow filters in PKT (AFSK) mode - only in RTTY! I couldn't believe
>it! Very weird that they changed that in the MARK-V. 73
>
>
>
>
>_______________________________________________
>RTTY mailing list
>RTTY@contesting.com
>http://lists.contesting.com/mailman/listinfo/rtty
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
---
|