Amps
[Top] [All Lists]

Re: [Amps] Amp causing RFI

To: Tim Duffy <k3lr@k3lr.com>
Subject: Re: [Amps] Amp causing RFI
From: Mark Schoonover <mark@ka6wke.net>
Date: Tue, 4 Feb 2020 17:26:27 -0800
List-post: <mailto:amps@contesting.com>
There can be two paths to ground. One from the back of your equipment to
the station ground then back to house ground. The other path is from the
ground in the outlet back to breaker box to house ground  then back to
station ground. That creates a large loop depending on how much AC wiring
involved.

 I use several of those three prong to two prong AC adapters to break the
path in the AC ground leaving just one path to ground through station
ground. All chassis grounds are connected to AC ground so electrical safety
isn't compromised. Really cleaned up a lot of noise with my station.

The main video about RFI on my website I drew it out on a whiteboard. It's
about 2/3 of the video.

73! Mark KA6WKE

Website: https://www.ka6wke.net

On Tue, Feb 4, 2020, 16:32 Tim Duffy <k3lr@k3lr.com> wrote:

> Hello Mark,
>
> I am confused. What does a connection to earth ground have to do with
> ground
> loops?
>
> 73
> Tim K3LR
>
> -----Original Message-----
> From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Mark
> Schoonover
> Sent: Monday, February 3, 2020 11:04 PM
> To: jim@audiosystemsgroup.com
> Cc: Amps
> Subject: Re: [Amps] Amp causing RFI
>
> On Mon, Feb 3, 2020 at 7:57 PM Jim Brown <jim@audiosystemsgroup.com>
> wrote:
>
> > On 2/3/2020 7:48 PM, Alek Petkovic wrote:
> > > ndeed. It has also helped me and most ham friends I know on numerous
> > > occasions.
> > >
> > > Adding a few shallow buried wires to the ground rod has also worked
> well
> > > for me.
> >
> > Balderdash. The earth is not a sump into which noise, RFI, and other
> > trash is poured. Comments like this bring to mind the infinite number of
> > monkeys and typewriters producing Shakespeare.
> >
> > 73, Jim K9YC
> >
> >
> What having a decent ground does is eliminate the possibility  of ground
> loops provided the ground is lifted from the third pin of the AC plug. I
> did a comprehensive RFI video on the subject and show how ground loops can
> happen and what to do to eliminate them. Quite possibly the #1 cause of
> RFI. You can watch the video in the link below.
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>