Amps
[Top] [All Lists]

Re: [Amps] plate choke

To: alexeban@bezeqint.net, Amps@contesting.com
Subject: Re: [Amps] plate choke
From: Dennis12Amplify@aol.com
Date: Sat, 27 Aug 2005 06:24:56 EDT
List-post: <mailto:amps@contesting.com>
 
In a message dated 8/26/05 4:08:42 P.M. Central Daylight Time,  
alexeban@bezeqint.net writes:

Not  necessarily. You see, when resonances occur hot spots can develop in  the
area that  carries the current maximum. Presumably the resonance  arose at
the higher frequencies and that is precisely acting on the lower  impedance
part of the choke.
Alex         4Z5KS



Alex,
 
 I must be missing  something here.
 
 In my books,  resonance implies circulating currents that are equal in the 
entire resonant  loop.
 
 Any 'hot spots' would  be developed across the most resistive (Non-reactive) 
part of that loop and be a  result of the heat generated in that R due to 
those circulating  currents.
 
 Regards,
 
Dennis  O.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>