If someone would be so kind to lead me to the offending boards I would
appreciate it. I have a Paragon and am totally unfamiliar with the anatomy
of this rig. Perhaps a picture or two of the boards that may require
re-soldering.
Thank you
73
KD8Z@ARRL.NET
----- Original Message -----
From: "Randy Hargenrader" <k4qo@earthlink.net>
To: <tentec@contesting.com>
Sent: Monday, January 14, 2008 2:45 PM
Subject: Re: [TenTec] paragon PLL error - Help me decide!
> My Paragon had that problem - its easy to fix by resoldering the PLL
> modules. I didn't find it necessary to pull all the parts off, etc... I
> just reflowed the solder and the problem hasn't been back since.
>
> Mine had a bad solder joint due to temperature variations that
> eventually allowed a part lead to pull loose from the solder blob on the
> PCB. Re-flow fixed it.
>
> 73,
> Randy
> K4QO
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|