TenTec
[Top] [All Lists]

Re: [TenTec] Need help from an Orion owner......

To: "Ron Castro" <ronc@sonic.net>, "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Need help from an Orion owner......
From: "Bob McGraw - K4TAX" <RMcGraw@Blomand.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 8 Jan 2008 20:42:42 -0600
List-post: <mailto:tentec@contesting.com>
Great data.  Thanks.

Now to the ANT 1 vs. ANT 2 coupling, anything greater than 40 dB is of no significant value.

As they say, this is a  "no problem" issue.

73
Bob K4TAX


----- Original Message ----- From: "Ron Castro" <ronc@sonic.net>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Monday, January 07, 2008 11:49 PM
Subject: Re: [TenTec] Need help from an Orion owner......


Here's a chart that shows the readings in dBm related S-Units for the Orion
II:

http://www.n6ie.com/Orion%20S%20meter%20descrep.htm

Cheers!

        Ron  N6IE
     www.N6IE.com


----- Original Message ----- From: "Bob McGraw - K4TAX" <RMcGraw@Blomand.net>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Monday, January 07, 2008 9:00 PM
Subject: Re: [TenTec] Need help from an Orion owner......


Folks, if we are going to discuss this, lets get some data either in dBw
or
uV values.  Otherwise, what's an S-9 signal and a S-2 signal?

Frankly, with >60 dB isolation, a signal on the inactive input won't be
heard above atmospheric noise on the active input.

73
Bob, K4TAX



----- Original Message ----- From: "Merv Schweigert" <k9fd@flex.com>
To: "Carl Moreschi" <n4py@arrl.net>; "Discussion of Ten-Tec Equipment"
<tentec@contesting.com>
Sent: Monday, January 07, 2008 10:25 PM
Subject: Re: [TenTec] Need help from an Orion owner......


>
I just listened on my Orion.  I found an S9  CW station on antenna 1.
Switching to antenna 2, I could just barely hear him at S1.  This is
great
isolation.  So the real question is how many S units lower are you
hearing
the station with antenna 2 selected.  Mine is showing greater than 8 S
units
lower.

Carl Moreschi N4PY

I realize its not a Ten Tec but if you are interested in a comparison,
Ft-1000D  signal 30 db over 9,   just audible with ant 2 selected.
thats more what I consider isolation.  YMMV

My Omni 6 with S9 signal can just hear the ant 2 selected,
no meter movement.

I sure dont need a radio that can hear off the other antenna port.

Merv K9FD/Kh6


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec



_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec



<Prev in Thread] Current Thread [Next in Thread>