Thank you all for the very helpful comments.
Thanks to your tips on proper voltage/power cords and careful measurements, I
now have the following Po wer outputs:
144.2 MHz - 92 Watts into Bird 250C element and 88 Watts measured on the Drake
WV-4
432 & 440 MHz - 75 Watts into Bird 100D element.
1,296 MHz - 7.5 - 10.0 Watts from 7 different measurement methods - Bird 25 W
1.1-1/8 GHz & 10 W 400-1,000 MHz elements, Daiwa C495m & Comet CM1200 1.2 GHz
watt meter s, Narda 10 & 20 dB Directional Couplers, Narda 20 dB, 20 watt
attenuator - all 3 into 20 dB HP attenuator and Microwave power meter. The
average was 8.9 - probably "good enough" as KK7B says.
73's
Merle W7YOZ
----- Original Message -----
From: "MERLE COX" <w7yoz@centurylink.net>
To: "vhfcontesting" <vhfcontesting@contesting.com>
Sent: Wednesday, May 11, 2016 10:14:47 AM
Subject: IC910H Power Output Question
The IC910H is specified to deliver 100 Watts on 144 MHz and 75 Watts on 432
MHz, but my IC910H and several others I am aware of do not come within
25 Watts of this on either band. So I would like to know what others on the
list have experienced with this rig? Mine has been to ICOM twice and both
times was sent back saying it puts out the rated power. I have checked/changed
power cords, power supplies (ASTRON 35 Amp.), watt meters ( two different Bird
43 with several 100-250 MHz C elements, Drake WV4), short RG8 connecting cables
to Bird and quality loads but still only about 70 Watts on a good day.
Thanks for the input,
Merle W7YOZ
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|