I don’t mind spending, so long as I know which one to start with. I spent 42
Swiss Francs (ISO standard was priced in CHF). Just one of those things
--
73 de KG2V
Charlie
> On Jun 18, 2024, at 2:19 PM, Jim Brown <jim@audiosystemsgroup.com> wrote:
>
> On 6/18/2024 8:05 AM, Joe Subich, W4TV wrote:
>> Unfortunately, I do not see dimension specifications for the
>> contacts ... only the body, threads and *internal* dimension
>> of the pin.
>> Wikipedia <https://en.wikipedia.org/wiki/UHF_connector>
>> gives the center pin of the PL-259 as "approximately 0.156
>> inch (4mm) diameter".
>
> The definitions for many (most?) connectors are part of IEC Standards. That
> usually means that they are quite well defined by competent engineers.
> Unfortunately, IEC Standards also cross-reference each other, and are so
> expensive that only mfrs can afford to buy them, and you can't read them if
> you haven't paid up.
>
> Anyone can buy an AES Standard from the AES website, last I looked, for $10,
> free for AES Members.
>
> 73, Jim K9YC
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|