I must take apart my guyed 60' Rohn 45 and some of the bolts are not going
to come out without some encouragement. I could drive them out with a
hammer and punch or unscrew them through the thru holes in the tower's legs.
The tower will be used again so I do not want to mess it up unnecessarily.
Of course, I do not care about the bolts which go to the scrap metal
recyclers.
Thanks in advance!
Al-N6TA
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|