Towertalk
[Top] [All Lists]

Re: [TowerTalk] Where to get LMR 400

To: <jim@audiosystemsgroup.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Where to get LMR 400
From: <dj7ww@t-online.de>
Reply-to: peter.voelpel@t-online.de
Date: Tue, 3 Nov 2020 23:40:44 +0100
List-post: <mailto:towertalk@contesting.com>
I am aware of that, power levels were referenced for 100% duty cycle and
40°C ambient temperature.

73
Peter

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Jim
Brown
Sent: Dienstag, 3. November 2020 21:08
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Where to get LMR 400

See my comment re: duty cycle and conditions of installation.

73, Jim K9YC

On 11/3/2020 10:46 AM, dj7ww@t-online.de wrote:
> 7/8 inch Cellflex is a quarter of the price of RG393, good for 12.3kW on
6m,
> but hard to use as a rotator loop, more then double the diameter and far
> smaller bending radius.

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>