Towertalk
[Top] [All Lists]

Re: [TowerTalk] Balun for Force 12 6 Element 20 Meter

To: "'jimlux'" <jimlux@earthlink.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Balun for Force 12 6 Element 20 Meter
From: "Ron Gorski" <ron-n9au@sbcglobal.net>
Date: Tue, 21 Jul 2020 23:10:31 -0000
List-post: <mailto:towertalk@contesting.com>
It would be wise to use an oversized flat washer over the screw on the
inside of the plastic box before the lock washer and nut.
N9AU

-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of jimlux
Sent: Tuesday, July 21, 2020 10:01 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Balun for Force 12 6 Element 20 Meter

On 7/21/20 1:17 PM, Gary wrote:
> Jim & Steve,
> 
>       I'm not sure I follow... I have made some baluns recently with the 4
nut scheme that Jim is describing. Are you saying it is problematic or not?
> 

That scheme is not problematic, as far as the paired nuts, if they have
sufficient preload.

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


-- 
This email has been checked for viruses by AVG.
https://www.avg.com

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>