Towertalk
[Top] [All Lists]

[TowerTalk] Cordless Butane Soldering Irons

To: <towertalk@contesting.com>
Subject: [TowerTalk] Cordless Butane Soldering Irons
From: "Don " <w7wll@arrl.net>
Date: Wed, 19 Nov 2014 20:20:19 -0800
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
FWIW  I found this.

Weller PSI100K        Butane    90 min run time    125W at tip adj

Portasol Super Pro    Butane    90 min run time    125 W at tip adj

I found a Scope but it is probably OK for wiring on a tower but would not be sufficient for connectors.


There are others but none at this level, most 75W rating at tip and 60 min run time.

Again thanks for all the input, certainly are a LOT of opinions.

Don W7WLL




_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>