Solder Pro 120
http://www.amazon.com/Iso-Tip-7977-SolderPro-Butane-Soldering/dp/B001RISCAY
On 11/19/2014 11:20 PM, Don wrote:
FWIW I found this.
Weller PSI100K Butane 90 min run time 125W at tip adj
Portasol Super Pro Butane 90 min run time 125 W at tip adj
I found a Scope but it is probably OK for wiring on a tower but would
not be sufficient for connectors.
There are others but none at this level, most 75W rating at tip and 60
min run time.
Again thanks for all the input, certainly are a LOT of opinions.
Don W7WLL
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|