Re: [TowerTalk] Connecting Flat Copper to 5/8" Ground Rod

["Mark Robinson" <markrob@mindspring.com>]

As another option, I believe that cadweld sells a form designed to work with 
copper strap and circular copper clad ground rods
Mark N1UK

----- Original Message ----- 
From: "Mark Robinson" <markrob@mindspring.com>
To: "Ray Benny" <rayn6vr@cableone.net>; "TowerTalk" 
<TowerTalk@contesting.com>
Sent: Sunday, 13 October, 2013 9:41 PM
Subject: Re: [TowerTalk] Connecting Flat Copper to 5/8" Ground Rod


> I preformed the copper strap around half of the copper clad ground rod and 
> silver soldered the strap to the rod.
>
> Mark N1UK
>
>
>
> ----- Original Message ----- 
> From: "Ray Benny" <rayn6vr@cableone.net>
> To: "TowerTalk" <TowerTalk@contesting.com>
> Sent: Sunday, 13 October, 2013 5:47 PM
> Subject: [TowerTalk] Connecting Flat Copper to 5/8" Ground Rod
>
>
> > Has anyone come up with a way to connect flat copper straps to ground 
> > rods?
> > DXXE sells copper clamps w/ hardware, but at $35 a pop, I hoping that 
> > there
> > is a more reasonable way to get the job done.
> >
> > My copper strap is 2" wide, by 6ft, and about 18 ga, but not sure.
> >
> > Tnx,
> >
> > Ray,
> > N6VR
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk