Bill Ogden wrote:
> Simple suggestion: Ask the SteppIR people for a control-box connector with
> a few feet of cable on it. (That is, do not try to solder one yourself. It
> is difficult to do accurately without a proper jig.) Take this to the base
> of the tower. Cut the existing cable and connect all the pigtale lines at
> this point. A little messy with the 16+ wires, but it should be safe and
> accurate. Operating the control box from this point should resolve all the
> questions about the 500' cable. Of course, this assumes you can get 110v
> power to the tower base. Consider borrowing a generator, if necessary.
>
> Bill - W2WO
>
>
This is putting a lot on the back of the purchaser. It seems to me that
if the SteppIR won't work with 500' of SteppIR control cable, SteppIR
should say so. In other words, this 500' test should be done at
FluidMotion. They have plenty of cable, antennas and controllers to do
this simple test.
73,
--
Ken K4XL
k4xl@arrl.net
*** BoatAnchor Manual Archive ***
On the web at http://bama.sbc.edu and http://bama.edebris.com
FTP site info: bama.sbc.edu login: anonymous p/w: youremailadr
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|