[TowerTalk] SteppIR problem

["Ron Todd" <ron@k4wz.com>]

I suggested to cut the cable at the bottome of the tower and check. Even better 
climb the tower and the connector is right thire to test with a short  cable 
and you now have divided your problme in half. If you can get power up the 
tower with you power supply and control unit. I had to do that one time and the 
problem turned out to be in the connector in the shake.  It the small things 
that get us.

K4WZ
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk