Generator or a car battery & inverter.
Krish
w4vku
Bill Ogden wrote:
> Simple suggestion: Ask the SteppIR people for a control-box connector with
> a few feet of cable on it. (That is, do not try to solder one yourself. It
> is difficult to do accurately without a proper jig.) Take this to the base
> of the tower. Cut the existing cable and connect all the pigtale lines at
> this point. A little messy with the 16+ wires, but it should be safe and
> accurate. Operating the control box from this point should resolve all the
> questions about the 500' cable. Of course, this assumes you can get 110v
> power to the tower base. Consider borrowing a generator, if necessary.
>
> Bill - W2WO
>
> _______________________________________________
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|