Re: [TowerTalk] Re: [Antennas] inline female coax connector?

[Don Havlicek <n8de@thepoint.net>]

Actually ... if properly installed, the insertion loss for the 'barrel 
connector' is less than .5 db ... that has been addressed here before.
Don
N8DE

Jack Painter wrote:
> > Reading the info on the various coax types.
> > Keep seeing the references to barrel connectors.
> >
> > Is there a female coax connector?
> > I'm only familiar with chassis mount female connectors.
> > I'm asking about a female that would mate to a pl259.
> >
> > Bill H. in Chicagoland
>
>
> Bill, the barrel connectors are double-ended SO-239 females, intended for
> use as a union between two PL-259 male coax lines. Use them for temporary or
> emergency patchwork, because the insertion loss in these connectors is high.
>
> Jack
> Virginia Beach
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk