Towertalk
[Top] [All Lists]

RE: [TowerTalk] inline female coax connector?

To: "TowerTalk" <towertalk@contesting.com>
Subject: RE: [TowerTalk] inline female coax connector?
From: "Keith Dutson" <kjdutson@earthlink.net>
Reply-to: keith@dutson.net
Date: Wed, 13 Oct 2004 11:00:01 -0500
List-post: <mailto:towertalk@contesting.com>
Age old question.

It's hard to find a female PL259, which should be taken as a message:  "Use
a barrel connector."  The insertion loss is negligible to at least 400 MHz.

Keith NM5G

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of FireBrick
Sent: Wednesday, October 13, 2004 7:57 AM
To: TowerTalk List; Antenna List
Subject: [TowerTalk] inline female coax connector?

Reading the info on the various coax types.
Keep seeing the references to barrel connectors.

Is there a female coax connector?
I'm only familiar with chassis mount female connectors.
I'm asking about a female that would mate to a pl259.



-----------------------------------------------------
If you think nobody cares about you, try missing a couple of mortgage
payments. 
-----------------------------------------------------

Bill H. in Chicagoland


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>