On Tue, 27 Oct 1998 14:08:25 -0500 "F.R. Ashley" <frashley@netpath.net>
writes:
>used the heat shrink tubing............,
Hi Buddy,
There is a type of heat shrink,( I use ANDREWS ), that has an inner
coating. As the shrink is heated, the inner coating melts and flows into
all the nooks and crannies. It does make for a mess when it is removed
and you're trying to remove the connector.
During my cable tv work years, I never saw a "properly installed"
heat shrunk connecter, leak. I did see leakage when we used some heat
shrink without that inner coating. And by "properly installed", I mean
that the heat shrink was not nicked and it is heated and shrunk tightly
to the connector / equipment.
This is were it can get tricky.... not enough heat...it leaks ..... to
much heat ... damage to the coax / cable. It takes practice to heat the
shrink slow and steady. Which says something for the plain ole "rubber
seal and 3 wraps of scotch 33 " !
73 & Be Safe
Matt W3UUM
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|