Never thought of using a battery clamp.
Electrolytically, lead half way between copper and zinc so it is a nice
idea from a corrosion standpoint.
Wonder how fast it will melt in a lightning hit?
de n0yvy steve
k4sb@avana.net wrote:
>
> Well, Home Depot sells the ground rods, and almost any auto parts store
> has ready made battery cables in different lengths. I've got a couple of
> 30"s.
>
> The only thing I did to mine was to strip back the insulation a little bit
> at the clamps, and solder the wire, which is easily 1/4 inch thick, to the
> connectors on the end. You can also buy the end connectors individually,
> and on my short 75'...I got some diesel battery clamps, took off the
> tru bolt and pried it open enough to go over the tower leg. Put the bolt
> back on and it tightened like a charm.
>
> 73
>
> Ed
> -------------------------------------
> Name: ed sleight
> E-mail: k4sb@avana.net
To: <towertalk@contesting.com>
> Date: 11/6/96
> Time: 1:29:00 AM
>
> This message was sent by Chameleon
> -------------------------------------
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: K7LXC@contesting.com
> Sponsored by Akorn Access, Inc & KM9P
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P
|