Topband
[Top] [All Lists]

Re: Topband: Radials on ground v FCP

To: Rob Atkinson <ranchorobbo@gmail.com>, topband@contesting.com
Subject: Re: Topband: Radials on ground v FCP
From: CUTTER DAVID via Topband <topband@contesting.com>
Reply-to: CUTTER DAVID <d.cutter@ntlworld.com>
Date: Sat, 8 Jan 2022 15:27:28 +0000 (GMT)
List-post: <mailto:topband@contesting.com>
Rob

I recall a discussion on here some years ago which proposed that, whilst being 
an amazing antenna for top band, if you could achieve it, the broadcast model 
was not necessarily the best use of resources for amateur purposes, on the 
basis that broadcasters are mainly interested in ground wave to cover a defined 
relatively short range service area, whereas amateurs a more interested in dx.  

I don't recall how that discussion ended, but for purposes of saving wire, at 
least, the K2AV folded counterpoise (FCP) must be about as good as anyone could 
attain.  How it performs against that broadcast model would be of interest.

David G3UNA


 
> On 08 January 2022 at 14:02 Rob Atkinson <ranchorobbo@gmail.com> wrote:
> 
> 
> For medium wave, every ham who transmits with a base excited vertical
> radiator should get a copy of _Radio-Electronic Transmission
> Fundamentals_ by B. Whitfield Griffith, Jr.  2nd ed., Noble Pub. Co.,
> Atlanta Ga., c2000, ISBN 1884932134.  638 p.  Griffith is a retired
> principal engineer with Continental.  This classic college broadcast
> engineer textbook explains many fundamentals involving medium wave
> transmission in an easy to understand way.  Getting the most out of
> your valuable copper wire is more important now than ever because
> copper has risen to insanely high prices.
> 
> The book is probably out of print but might be available used from ABE
> Books https://www.abebooks.com/
> 
> 73
> Rob
> K5UJ
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector

<Prev in Thread] Current Thread [Next in Thread>