I have never had any problems with multiple rotors on my 100 ft shunt fed 45G
tower. I have had Ham IV’s, Tail Twisters, an M2 2800, and now a prop pitch
from K7NV. I run full power on 160 and always have.
73,
John, W4NU
Sent from my iPhone
> On Aug 25, 2020, at 11:04 AM, N4ZR <n4zr@comcast.net> wrote:
>
> Andy, I had two Yeasu rotators on my shunt-fed tower, one at 62 feet and one
> at 97 feet, for about 15 years and never had trouble, although I was just
> running 100 watts on 160
>
> 73, Pete N4ZR
> Check out the Reverse Beacon Network
> at <http://reversebeacon.net>, now
> spotting RTTY activity worldwide.
> For spots, please use your favorite
> "retail" DX cluster.
>
>> On 8/24/2020 6:27 PM, Roy Morgan wrote:
>> Contact Norm's Rotor Service for advice.
>>
>> Normsrotorservice.com
>>
>> Roy Morgan
>> K1LKY Western Mass
>>
>>>> On Aug 23, 2020, at 3:15 PM, Andree DL8LAS via Topband
>>>> <topband@contesting.com> wrote:
>>>
>>>
>>> Hey,
>>>
>>> how can I protect my rotator from HF in the shunt fed tower , so that the
>>> poti or other electric doesn't burn in the rotator?
>>>
>>> 73 Andy DL8LAS
>>>
>>>
>>>
>>> _________________
>>> Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
>> _________________
>> Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|