To: | topband@contesting.com |
---|---|
Subject: | Re: Topband: Rotator Potentiometer shunt fed twr |
From: | Jim Brown <jim@audiosystemsgroup.com> |
Reply-to: | jim@audiosystemsgroup.com |
Date: | Sun, 23 Aug 2020 15:17:22 -0700 |
List-post: | <mailto:topband@contesting.com> |
On 8/23/2020 2:39 PM, Phil Duff wrote: Aren't most rotors and their masts normally grounded thru the rotor body and mast clamp & mounting bolts to their tower/support? Antenna current at the joint between the two pieces of the rotator is a common source of IMD, as first articulated by W3LPL (although he calls it something else). 73, Jim K9YC _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Topband: Rotator Potentiometer shunt fed twr, Phil Duff |
---|---|
Next by Date: | Re: Topband: Rotator Potentiometer shunt fed twr, Larry via Topband |
Previous by Thread: | Re: Topband: Rotator Potentiometer shunt fed twr, Phil Duff |
Next by Thread: | Re: Topband: Rotator Potentiometer shunt fed twr, Larry via Topband |
Indexes: | [Date] [Thread] [Top] [All Lists] |