Unclear how this might help?
Aren't most rotors and their masts normally grounded thru the rotor body
and mast clamp & mounting bolts to their tower/support?
Have run 160m QRO shunt-fed tower with CDE rotors for decades with no
rotor bypassing and no rotor pot burning noticed. YMMV
de NA4M
On 2020-08-23 2:39 PM, dj7ww@t-online.de wrote:
Bypass the rotor with thick ground lead from the rotating pipe mast to the
tower,
--
-. .- ....- --
Phil Duff
na4m[at]suddenlink[dot]net
Wall Art Photography <http://philip-duff.pixels.com/>
Stock Video Clips <https://www.pond5.com/artist/pcdmedia#1/2063/>
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|