Topband
[Top] [All Lists]

Re: Topband: Ground Conductivity

To: topband@contesting.com
Subject: Re: Topband: Ground Conductivity
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
Date: Wed, 25 Mar 2020 10:57:08 -0700
List-post: <mailto:topband@contesting.com>
On 3/25/2020 9:17 AM, Grant Saviers wrote:
Areas with poor ground conductivity or sites with poor or deteriorated ground systems may see a considerable shift in base or common point resistance with changes in the amount of water in the soil. Similar (and sometimes more dramatic) changes can occur when the ground freezes."

Hi Grant,

The references to "common point resistance" implies a multi-tower array, commonly used on the AM band to protect distant stations from interference on the same or adjacent frequencies. This protection is accomplished by nulls in the direction of the protected station, and achieving nulls requires a considerable degree of precision in the cancellation of radiation from the various towers. Anything around the array, including conductive objects and variations in the ground system can screw up the pattern. There are well known examples of things like a big water tank mounted on a tower in the far field of the array doing this.

I don't know if it's still required today, but when I worked in broadcasting, each station using a directional antenna was required to make periodic field strength measurements in their nulls to proof their pattern.

These BC arrays are generally far more complex than the 4-squares we use, and variations in our radial/counterpoise systems and the soil underneath them largely affects nulls, as opposed to forward gain.

73, Jim K9YC
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector

<Prev in Thread] Current Thread [Next in Thread>